Injectors

[JET]

Well, I have been looking for 1600cc injectors and found these:

http://store.summitracing.com/partdetail.asp?autofilter=1&part=FMS%2DM%2D9593%2DE303&N=700+4294870762+400070+115&autoview=sku

These are the correct ones, right? Anyone want to go in on a set? $200 for 4.

[Halon]

I'd write them and make 100% sure they are in stock. And ask them twice. Everywhere I tried to buy them from were sold out for an indefinate period of time.

I ended up giving up, and just bought a set from LSE. But if you find out they are in stock, hit me up on AIM, I'd be willing to get another set.

[b00stcreep21]

Also, DSM injectors are peak and hold, those are saturated style injectors

[Shane@DBPerformance]

The factory DSM ECU and his AEM EMS are designed to run high impedance saturated injectors. Mitsu just went the cheapo route and threw a resistor box in to allow the use of low impedance injectors. The ECU still runs them like a saturated inj, it doesn't do anything special to truely make use of a peak and hold style pulse.

Those injectors are a weird ohm, but the AEM EMS seems to have a Ford Motorsport 152lb 5ohm injector in the injector wizard.

[Halon]

After researching all of thise awhile back, what I gathered was all these other companies selling 1600cc injectors (PTE, FIC...) they all are using the Ford injectors, and just reselling them under their own name. Matter of fact some of the injectors people are receiving from these companies, there's a ford logo on some of them. There are a couple different companies who make these for ford (Bosch, i forgot the others) which is why you will see some that are different colors (white, red, grey).

From everything I've found, these are basically the same injectors you will get from any other source, and will perfom the same as anything you'd buy from one of the DSM vendors. Slight machining to the injector or the fuel rail may be required though. Not really a big deal though.

[JET]

Thanks a ton Shane! So I can get these, kill the resistor box and be good to go. Excellent!

Once again, anyone else wanna go in on a set? :D

[DBMajik]

For $200 I'll definitley take a set! E85 here I come!

[Shane@DBPerformance]

No, you will still need a resistor box, resistors or an injector driver box. They are still a lower resistance injector than a normal saturated 11-16ohm injector, so more resistance would need to be keep in the loop to keep from burning up the injector drivers in your ECU. Who knows if they are really saturated injectors though. I don't trust Summits info 100%, the Ford Motorsport catalog doesn't mention if it's saturated or peak and hold, and a saturated injector of that large a size is quite unusual.

I wonder how well they are calibrated though. In the Ford Motorsport catalog, they sell matched sets of injectors that flow within 1% of each other and that type of injector is not available in matched sets.

[Halon]

Ya you will still need the resistor box as these are still low impedance injectors.

Make sure they are in stock though Jet. I had put in several orders with companies who said they had them in stock, until I put in an order and a day later I get an email saying sorry, they are on backorder for a week. I ended up waiting a good 3 months for these until I finally gave up and just bought a set of PTE's.

[EclipseGST]

I have a set of PTE's that I bought from Shane last year, they didnt have anything on them that showed them to be Ford injectors but I'm sure they are damn near all the same.

Although I am interested in buying up a set as well. I will need another 4 in order to run methanol this year. So if you find someone and anyone else wants to go in on a set, let me know.