Project Fast Spyder

[blageo23]

This winter/spring I am doing a ton of Projects/MODs. This Thread will fill you guys in on it.

The Mods:
Built 2.4L
-Eagle Rods
-Wiseco Pistons
-ARP Head Studs
-ARP Main Studs
-ACL Bearings
-Cometic Head Gasket
-6-Bolt Main Girdle
-BS Elim
-All the Mitsu Timing parts and Front Cover

SS Fuel Lines(Possibly from the tank back to the tank)
Magnus Intake Manifold
Greddy Cam Gears
AEM Wideband Controller
Coil On Plugs
Pretty JMF Heatshield
SS Turbo Feed and Return(Both coolant and oil)

And Possibly
-HKS 280 Cams
-T-bolt Clamps all around
-Ksport Coilovers
-Aluminum Radiator
-Water Injection
-AWD

Now for the projects:
Rewire the whole engine bay to make it look clean, Split up the Big harness and make small ones that will blend in, Get rid of wire im not using(Soleniods, CAS...)

Move Ugly Underhood Fuse Box To Inside. That thing is ugly and makes the underhood look nasty

Here is where im at soo far
Picked up my Pistons, Rods and ARPs yesterday
http://www.mitsustyle.com/photopost/data/500/medium/CIMG1127.JPG

http://www.mitsustyle.com/photopost/data/500/medium/CIMG1128.JPG

http://www.mitsustyle.com/photopost/data/500/medium/CIMG1129.JPG

The Wire MESS! All Sorted out just need to wire loom it and disconnect the unwated wires and possibly shorten up most of the wires.

http://www.mitsustyle.com/photopost/data/500/medium/CIMG1123.JPG

http://www.mitsustyle.com/photopost/data/500/medium/CIMG1124.JPG


Let me know what you think.

[HiImBrian]

Wow looks like one hell of a project. Good luck!

[TkrPerformance]

very nice you swap it like mine awd

[92EvilTalon]

That big of a wire project will make me go crazy for a day or two. It will look very sweet and clean when you are done. Good luck.

P.s are you moving the battery to the back or is it already done?

[blageo23]

That has already been done :)

[Thor06]

Nice dude, good luck!

[blageo23]

A little update:
Went to MAP on sunday and ordered ACL race bearings and Cometic head gasket
Also this stuff came in the mail today...
Greddy Cam Gears

http://www.mitsustyle.com/photopost/data/500/medium/CIMG1228.JPG

COP Plate

http://www.mitsustyle.com/photopost/data/500/medium/CIMG1230.JPG

Black Prothane Motor Mounts, AEM Serial Gauge, 6AN Fuel Line And Fuel Rail Fittings

http://www.mitsustyle.com/photopost/data/500/medium/CIMG1229.JPG

[JustROLLIN]

Nice project. And to think this all started with removing a BCS restrictor in the parkinglot of Elite on the dyno day. Quite a change.... ;)

[92EvilTalon]

Looks like you got alot of nice parts. How did that wire tuck go or are you still working on that?

[blageo23]

Nice project. And to think this all started with removing a BCS restrictor in the parkinglot of Elite on the dyno day. Quite a change.... ;)

HAHA I forgot about that! That seems like along time ago.
I just went out yesterday and did some more on the wiring. Its gonna be awhile before thats done. Alot more work then I thought, but managable. Next week is my spring break and I took off work as well so I will hopefully get alot done(assuming I get up and actaully work on it)