Log in

View Full Version : Im Bending over, Insert Rape Staff here...

tpunx99GSX
10-10-2006, 12:37 PM
Ok so on the way to work one of the main bolts on the transmission broke. The one that goes from the block to the tranny just above the half shafts. So the tranny wouldnt disengage, but i managed get it locked down enough to get it to a shop. I get it there, and the guy looks at it and decides that hes gonna have to take out the tranny to drill out the bolt.
He estimated 7 hours to pull the tranny and put it back in, (can one of the shop guys check this in the book?) and about 3 hours to drill out the bolt. At $78 /hour i have a feeling that they are going to charge me for a part i dont need and totally rape me. At least i made sure that they are going to use redline fluids. (im sure more rapage there too)
I just took it to the first shop i could find. But there isnt much i could do because the car needs to run.
Anyways ::End rant::
Shane@DBPerformance
10-10-2006, 12:40 PM
I think book time on a 2G AWD is somthing like 7.4 hours. Probably half an hour less for a 2G FWD.
blageo23
10-10-2006, 12:46 PM
3 Hours to drill out a bolt tho? I did mine with no "real" tools and it took me like 45 min tops. That sucks tho man.
Kracka
10-10-2006, 03:23 PM
That sucks Tom :( Aren't modded DSM's fun? Hopefully no other damage(s) happened to the tranny or anything else.
1ViciousGSX
10-10-2006, 07:15 PM
Tom's used to getting it in the ass. ;)

Get a second opinion (on the tranmission issue :p ).
92EvilTalon
10-11-2006, 01:59 PM
No cracked Bellhousing ...? Lucky there.... Tom, why can you do it at home? I was just wondering. I mean he might find a Unicorn in your exhuast. Thats just poking holes in it and shitting in your filters too....
niterydr
10-11-2006, 02:11 PM
http://images.google.com/images?q=tbn:O-0pA3xul8j6SM:http://www.caneman2.com/OAK1.JPG
+
http://myspace-739.vo.llnwd.net/00607/93/70/607400739_m.jpg
=
LMAO.
niterydr
10-11-2006, 02:12 PM
No cracked Bellhousing ...? Lucky there.... Tom, why can you do it at home? I was just wondering. I mean he might find a Unicorn in your exhuast. Thats just poking holes in it and shitting in your filters too....

http://gallery.the-ac.net/albums/uploaded/EnglishMotherfucker.jpg
tpunx99GSX
10-12-2006, 01:42 AM
No cracked Bellhousing ...? Lucky there.... Tom, why can you do it at home? I was just wondering. I mean he might find a Unicorn in your exhuast. Thats just poking holes in it and shitting in your filters too....
The reason i wasnt gonna do it myself because, a little over a month ago i took out and put in my tranny 3 times in a single week in my garage while it was on jack stands. NOT AGAIN. And i was on my way to work.
Even though it took two full days to do this job they stood by their quote and didnt charge me any more then they quoted. Still cant believe it took them 6 hours to just take out the tranny. i did it easily in an hour and a half. without a lift.
1slowdsm
10-12-2006, 10:34 AM
Still cant believe it took them 6 hours to just take out the tranny. i did it easily in an hour and a half. without a lift.

Damn, it took them that long? It didnt even take me that long and I've hardly got tools, a couple jackstands and I was reading the vfaq all the way through it plus I'm not that big of a guy either...lol.