Anybody want to help with tuning?

[munster000]

I just put a new turbo, injectors, and mas on my 1st gen. I am not experienced with tuning so I was wondering if someone would be interested in meeting up with me and showing me a few things on how to set it up. I am using mmcd on my palm, and an safcll. I'm just looking to set my car up the best I can and maybe take it to the Dyno if necessary.

I live in Burnsville close to 35 and 42. I have a double car garage with lots of tools.

Thanks,
Nate
boyer000@mn.rr.com
612-578-1440

[Shotgun!]

Call LSE and get some dyno time.

763-416-DYNO

[munster000]

My car needs to be adjusted....I wouldn't even want to drive it to the dyno.

[Boostin_dreams]

Ok well then trailer it to DB cuz Shane will set you up and if not Swanny will. Just dont beat on it the whole way to either shop man you should be fine

[tim]

If you post the exact mods you have I am sure someone would give you SAFC settings to get you close to get you to some one that can help you further.

From there, pic DB, LSE, or MAP. They all know there stuff and could help you.

[slowbubblecar]

What size injectors do you have and what are your other mods.

[sleepydsm]

Dont you just calculate the difference between your stock and new injectors, and adjust the settings to compensate for that? )at least at idle. Then you monitor you logger while you drive around. when certain values go out of range, add or subtract more fuel on the different throttle settings. I wish someone had a specific tuning FAQ that showed what things you need to watch on the logger, and then what values they should typically stay at.

[Shane@DBPerformance]

If you tell us the MAF, injector size and base fuel pressure(if known), we can give you some SAFC settings to get the car driveable.

Do you have an EPROM ECU? Tuning directly inside the factory ECU is the next best thing to a standalone as far as fuel and timing control on these cars.

[niterydr]

I just put a new turbo, injectors, and mas on my 1st gen. I am not experienced with tuning so I was wondering if someone would be interested in meeting up with me and showing me a few things on how to set it up. I am using mmcd on my palm, and an safcll. I'm just looking to set my car up the best I can and maybe take it to the Dyno if necessary.

I live in Burnsville close to 35 and 42. I have a double car garage with lots of tools.

Thanks,
Nate
boyer000@mn.rr.com
612-578-1440

Hey Nate, give me a call and I'll give you some settings that will get you up here.

[cudvig]

I have a good friend who tuned my car for me he is really really good at it too. He will want alittle money not much, to help you out man. LMK and he lives rite in AV