PDA

View Full Version : 2.4l???


Pages : [1] 2 3 4

eclipse_spyder
09-09-2006, 01:31 AM
ok so im still a noob about dsm's. what does it mean when the say its a 2.4 liter stroker??? did they just put in the crankshaft stroker kit in the 2.0 block? or did they change the block too?

iceminion
09-09-2006, 04:18 AM
using the 2.0 block you can put a "stroker" crank kit in it to achieve 2.3 or 2.4L displacement. this = $$$$$$.

But 9 times out of 10 they are talking about the 4g64. (same as g4cs)

The process involves finding a 91 hunday sonata, taking the motor.

Using only the block and the crank from the hunday, add all of the stuff from your 2.0 (head, water pump, oil squirters, oil pan, timing junk, etc...) to the 2.4.

TAADAAAAA!! you have a 2.4 monster motor. (you will also NEEEEEED new pistons)

Seems complicated, but its totally worth it, I shall have on sooner or later.

sleepydsm
09-09-2006, 12:54 PM
There are MANY cars you can find a 6bolt 4G64. I see one or two just sitting in junkyards all the time. As he said, most of the time when someone is talking about the "2.4L" they mean they have a 2.4L block from one of mnay non-turbo cars. Then you put in low compression pistons, and the DOHC turbo head bolts right on, as well as pretty much everything else. So, you basically "swap blocks" to get a .4L increase in displacement. And with our little 4 bangers, every little increase helps!

1ViciousGSX
09-09-2006, 01:31 PM
Adds 50 hp & 70 lb/ft

96 Gsx Awd
09-09-2006, 01:39 PM
You shoudeve researched about 2.4 litter swap in the search section of forums, but minion pretty much cleared it up for you.

eclipse_spyder
09-09-2006, 10:48 PM
thanks for the helpful info guys. now i want that block. if you guys know anyone with one for sale, lmk.

eclipse_spyder
09-09-2006, 10:49 PM
You shoudeve researched about 2.4 litter swap in the search section of forums, but minion pretty much cleared it up for you.

well i couldnt really find any info...but now i know

eclipse_spyder
09-09-2006, 10:52 PM
"you will also NEEEEEED new pistons"

for this, will any of the aftermarket eclipse pistons fit in it like ross pistons or other brand?

eclipse_spyder
09-09-2006, 11:27 PM
also is a 4g64 block only from spyder's? can you just put a 1g turbo head on it?

iceminion
09-10-2006, 02:04 AM
Spyders have a 7 bolt motor......people usually dont upgrade those. I am not saying it cannot be done, I am just suggesting that you go 6 bolt.

4g64 usually means 7 bolt.
g4cs usually means 6 bolt.