Sale: Fresh 1g semi built head & bc 272 cams

[bigboostingst]

Up for sale is a ready to run 6 bolt head. It was rebuilt less than 5000 miles ago and has a fresh mating surface. It has been bolted to a short block since being resurfaced but never ran (I'm switching to a 2g head because I picked up a 2g magnus mani), it hasn't even had oil/coolant in it.

-1mm oversized valves
-Viton valve stem seals
-Evo 8 valve springs/retainers (Stock DSM retainer = 15.2g, Crower CM-8.5, Stock Evo 8 3.98 grams!!!!! That is weight that the spring does not need to lift every single valve event. Considering 8k RPM- that's 40,800 grams or 99 pounds worth of weight the spring does not have to contend with.)
-Light port and polish
-Oil port mod

$400obo for the head.
-----------
SOLD SOLD SOLD $OLD
I also have 2 sets (4 total) of BC 272 cams. These are very nice, proven cams:
http://www.dsmtuners.com/forums/cyli...2-cams-18.html

Both sets have very low miles. I'll let them go for $300 a set.
SOLD SOLD SOLD $OLD
------------

Feel free to call/text me at 763-4OO-1235

[s1ngletracker]

Who did the rebuild/porting work?

[turbotalon1g]

Would you say this head is the most fresh? :uhoh:

[dsmreck]

omg $300 for bc cams now?

[bigboostingst]

Originally Posted by s1ngletracker

Who did the rebuild/porting work?

Honestly, I have no idea. I bought the head from 1999Gst, to my understanding he took it off of a car that he purchased. Maybe he can chime in. I added the Evo 8 valve springs/retainers and lapped the valves while doing so. I also had it resurfaced.

Originally Posted by turbotalon1g

Would you say this head is the most fresh? :uhoh:

Valid question, I wouldn't say it is the most fresh. I've seen more fresh but this one is definitely pretty fresh. You could say fresher than most.

Originally Posted by dsmreck

omg $300 for bc cams now?

I'm not sure if you are trying to crap on my thread or not but since you're newer here I'll give you the benefit of the doubt. Yeah, that's what they go for. In fact this must have been a decent price, both sets sold in under 2 days.

[shakojdub1425]

Trade for some tools?

[1999Gst]

Originally Posted by bigboostingst

Honestly, I have no idea. I bought the head from 1999Gst, to my understanding he took it off of a car that he purchased. Maybe he can chime in. I added the Evo 8 valve springs/retainers and lapped the valves while doing so. I also had it resurfaced.


Valid question, I wouldn't say it is the most fresh. I've seen more fresh but this one is definitely pretty fresh. You could say fresher than most.


I'm not sure if you are trying to crap on my thread or not but since you're newer here I'll give you the benefit of the doubt. Yeah, that's what they go for. In fact this must have been a decent price, both sets sold in under 2 days.

Came from snowman181 on here there's a thread on here with info let me look.

[bigboostingst]

Originally Posted by 1999Gst

Came from snowman181 on here there's a thread on here with info let me look.

Thanks man, here is a link to his original ad:

http://www.mitsustyle.com/forums/showthread.php?t=30862

[bigboostingst]

I'd also be willing to put in stock springs/retainers and drop the price if anyone is interested!

[bigboostingst]

SOLD!