MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Classifieds > Mitsu vehicle parts for sale

Reply
 
Thread Tools Display Modes
Old 05-05-2009   #1
GREASEMONKEY
Banned
 
GREASEMONKEY's Avatar
 
Moon Lander Champion!
Join Date: Sep 2005
Location: MPLS
Drives: 92 TSi
Posts: 469
Send a message via AIM to GREASEMONKEY
Race Parts..

I've decited to now part out my whole setup! Everything i have is now for sale! All prices are BO but NO LOWBALLING! Keep in mind 98% of the parts are brand new!

Now Parting Out The Motor, Prices will only be negotiable if you buy more then one thing... Everything in the motor is BRAND NEW! 0 MILES!

*2.0L 6 Bolt, Block was hot tanked, Bored & Line honed. It has new oil squirters, ARP main studs, New Rear Main Seal, New Dipsick & Tube, And also the crank was micro polished & the oiling holes were recessed. (I have about $750 into whats listed above! And all the reciepts to prove it)

I will sell the above for $500

ACL race series main & rod bearings
Manley "I" Beam Rods (Paid $725 / Selling For $500)
Mahle 7.5:1 Pistons (.040 Over) - (Paid $437 / Selling For $350)
Arp L19 headstuds (Paid $230 / Selling for $175)
Mitsu MLS HG (.040) - (Paid $115 / Selling for $75)
New Mitsu front case & BSE (Paid $?? / Selling for $125 W/ BSE)
Power Enterprises Kevlar TB (Paid $140 / Selling for $100)
OBX Aluminum 6.5 Quart oil pan - Modified For ARP Main Studs (Selling for $125)

*The Head is also built, All the work was done by D&G Motors in St. Louis Park. It has the following Done to it:

6 HRS of port and polish work
5 Angle valve job
Ferrea Comp valves I / E, Intake valves are 1mm Over (NOT SEPERATING FROM HEAD)
3G Lifters (Paid $125 / Selling them for $115
Webcam dual titanium springs & retainers (NOT SEPERATING FROM HEAD)
Crower 414 cams (280's) (Paid $350?? / Selling for $275 OBO) **SOLD**
AEM adjustable timing gears (RED) - (Paid $300 about 5 YRS ago / Sell for $150 OBO)
Shaved and polished VC ($50)

I would really like to sell the head assembled, But i will part it out as well if there are buyers for a majority of the parts. I have a reciept from D&G for $2118.00 and that was only for the following:

**COPIED STRAIGHT FROM THE RECIEPT**

*Intake & Exhaust Valves
*Lifters
*New Keepers
*New Oil Plugs
*New Valve Seals
*6 HRS of P&P
*5 Angle Valve Job
*Resurfacing the head
*Tip Valves, Assembly of the Cams, Rocker arms, And Lifters
*Hone Valve Guides to clean
*New Rocker Arms

Everything else in the head was paid for seperatly, I have over 3K into the head with parts and labor!!

Prices are FIRM, But willing to entertain offers..
*Longblock with all the parts listed above $4200.00 FIRM! (I have well over that in parts and labor)
*Shortblock $2600.00 FIRM ASSEMBLED
*Head $1750 FIRM ASSEMBLED! OR If you want it W/O some of the parts id be willing to work out some kind of deal. I will also do the same deal with the shortblock. If you want the shortblock but you dont want all the parts in it we can work out something..
__________________________________________________ ______

**OTHER PARTS**

*ACT XACT 11# Flywheel under 1500 Miles $100

*10 Gallon Summit Aluminum Fuel cell $150 OBO

*Autometer PHANTOM- Boost (0-60PSI) & Oil Pressure Both are Mechanical 30 OBO Each

*Crane Cams HI-6 Ignition Setup, W/ Electronic Trigger box $200 OBO

* C.O.P 300m Coils, Polished Plate $150

-*- Or buy them as a combo for $400 OBO -*-

*17" ADR DV8 Wheels (No Tires) 3 Good rims & 1 has a chunk missing out of the lip. Still held air, But wouldnt suggest driving with it. Possibly could be fixed, Or you can buy a single rim and have a set of 4 for cheap. $100 OBO

Im sure im forgetting a ton of stuff right now but im going to go through everything and see what i missed so keep posted!

I also still have a ton of stock 1G & 2G Parts so if you need anything just let me know and i will see if i have it.

I want this stuff gone so feel free to make me an offer if your interested in anything, You can get a hold of me on my cell @ 651-366-8682 or my E-mail is ModernFab@Gmail.com



Thanks
-Stephan

Last edited by GREASEMONKEY; 07-28-2009 at 10:54 PM.. Reason: Added more parts / Parting out car!/ Trades?
GREASEMONKEY is offline   Reply With Quote
Old 05-05-2009   #2
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
Send a message via AIM to turbotalon1g
Re: Race Parts..

Halon will be interested in that ignition system I believe.
__________________
Aaron/brownman/big brown.
'91 Automagic.
'02 Z06
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 05-05-2009   #3
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: Race Parts..

Quote:
Originally Posted by turbotalon1g View Post
Halon will be interested in that ignition system I believe.
I thought he was sold on the Dynatek?
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 05-05-2009   #4
GREASEMONKEY
Banned
 
GREASEMONKEY's Avatar
 
Moon Lander Champion!
Join Date: Sep 2005
Location: MPLS
Drives: 92 TSi
Posts: 469
Send a message via AIM to GREASEMONKEY
Re: Race Parts..

Cool, There is one other person interested but i dont know if he is serious about buying it or not. First one with cash takes it.

-Stephan
GREASEMONKEY is offline   Reply With Quote
Old 05-05-2009   #5
turboimports
 
turboimports's Avatar
 

Join Date: Aug 2004
Location: St. Paul, Minnesota
Drives: DSM and Mitsu history
Posts: 444
Re: Race Parts..

Where was the fuel cell location?
I'm very interested if it would fit in the trunk of the Spyder and the lines and everything all will work accordingly.
Does it come with fuel filter? What size SS lines?
Fuel cell alcohol compatible?

Last edited by turboimports; 05-05-2009 at 10:48 PM..
turboimports is offline   Reply With Quote
Old 05-05-2009   #6
GREASEMONKEY
Banned
 
GREASEMONKEY's Avatar
 
Moon Lander Champion!
Join Date: Sep 2005
Location: MPLS
Drives: 92 TSi
Posts: 469
Send a message via AIM to GREASEMONKEY
Re: Race Parts..

Quote:
Originally Posted by turboimports View Post
Where was the fuel cell location?
I'm very interested if it would fit in the trunk of the Spyder and the lines and everything all will work accordingly.
Does it come with fuel filter? What size SS lines?
Fuel cell alcohol compatible?
I cut out the spare tire hump in the rear and put it in there, I have a custom bracket made that will go with the setup also.

It's a custom setup and can be made to work in any vehicle, You will have to modify a few things but it will fit.

It does come with fuel filters, They are Aeromotive filters, It has one before the pump and after.

The fuel line coming off the cell to the pump is -10, From the pump to the fuel rail is -8 and from the FPR back to the cell is -8.

-Stephan
GREASEMONKEY is offline   Reply With Quote
Old 05-06-2009   #7
turboimports
 
turboimports's Avatar
 

Join Date: Aug 2004
Location: St. Paul, Minnesota
Drives: DSM and Mitsu history
Posts: 444
Re: Race Parts..

Ok, nice. Do you know how fine the filters are? Thanks.

Last edited by turboimports; 05-06-2009 at 07:30 AM..
turboimports is offline   Reply With Quote
Old 05-06-2009   #8
GREASEMONKEY
Banned
 
GREASEMONKEY's Avatar
 
Moon Lander Champion!
Join Date: Sep 2005
Location: MPLS
Drives: 92 TSi
Posts: 469
Send a message via AIM to GREASEMONKEY
Re: Race Parts..

I believe they are 10 Micron. Maybe John can chime in, He would know.
GREASEMONKEY is offline   Reply With Quote
Old 05-06-2009   #9
turboimports
 
turboimports's Avatar
 

Join Date: Aug 2004
Location: St. Paul, Minnesota
Drives: DSM and Mitsu history
Posts: 444
Re: Race Parts..

Called you but no one picked up. I left a message. You can give me a call at 651-278-9759. Do you know if the cell is alcohol compatible? We would be using ethanol.

Thanks.

-Lor
turboimports is offline   Reply With Quote
Old 05-06-2009   #10
Swifty1638
Unsure resident asshole
 
Swifty1638's Avatar
 

Join Date: Mar 2005
Location: MN
Drives: '92 Eagle TalonTSI w/many mods
Posts: 3,696
Send a message via AIM to Swifty1638
Re: Race Parts..

arg..turbo is HALF tempting..then again, not. lol..bump
__________________
Black 1GB Mafia #1
744AWHP/526TQ-Shootout mode
639.6AWHP/452TQ-DB's dyno

I wanna go fast.
Swifty1638 is offline   Reply With Quote
Old 05-06-2009   #11
GREASEMONKEY
Banned
 
GREASEMONKEY's Avatar
 
Moon Lander Champion!
Join Date: Sep 2005
Location: MPLS
Drives: 92 TSi
Posts: 469
Send a message via AIM to GREASEMONKEY
Re: Race Parts..

Quote:
Originally Posted by turboimports View Post
Called you but no one picked up. I left a message. You can give me a call at 651-278-9759. Do you know if the cell is alcohol compatible? We would be using ethanol.

Thanks.

-Lor
The cell is alcohol compatible, I just got your message and gave you a call sorry if i called too late, Feel free to give me a call sometime after 12. Im not too much of a morning person.

-Stephan
GREASEMONKEY is offline   Reply With Quote
Old 05-06-2009   #12
GREASEMONKEY
Banned
 
GREASEMONKEY's Avatar
 
Moon Lander Champion!
Join Date: Sep 2005
Location: MPLS
Drives: 92 TSi
Posts: 469
Send a message via AIM to GREASEMONKEY
Re: Race Parts..

Im really trying not to sell the stuff on the bottom half of the page but i will if i have to. I basically need to come up with $500 by saturday and then i will be good.
GREASEMONKEY is offline   Reply With Quote
Old 05-07-2009   #13
Pushit2.0
15min late to the world
Re: Race Parts..

They should be the 10 micron replaceable elements.
__________________
Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.
Pushit2.0 is offline   Reply With Quote
Old 05-07-2009   #14
95tsi
 
95tsi's Avatar
 

Join Date: Nov 2003
Location: Duluth
Drives: a pos
Posts: 722
Re: Race Parts..

I called yesterday left a message and no return call. Interested in the seats. Please get back to me.
95tsi is offline   Reply With Quote
Old 05-07-2009   #15
turboimports
 
turboimports's Avatar
 

Join Date: Aug 2004
Location: St. Paul, Minnesota
Drives: DSM and Mitsu history
Posts: 444
Re: Race Parts..

I work second shift from about 11 AM to 9 PM. Depending on where you're located, me and my brother can come see it afterwards. Otherwise Fridays and late Saturday may work for us.
turboimports is offline   Reply With Quote
Old 05-07-2009   #16
mike55112
 
mike55112's Avatar
 

Join Date: Sep 2006
Location: new brighton
Drives: 04 evo
Posts: 1,212
Re: Race Parts..

Quote:
Originally Posted by turboimports View Post
I work second shift from about 11 AM to 9 PM. Depending on where you're located, me and my brother can come see it afterwards. Otherwise Fridays and late Saturday may work for us.

stop by primo performance.
__________________
03 as evo-sold
04 bby ssl-sold
05 ww mr-sold
03 tb evo- current
mike55112 is offline   Reply With Quote
Old 05-07-2009   #17
asshanson
immune from paybans
 
asshanson's Avatar
 

Join Date: Oct 2005
Location: West Des Moines
Drives: poorly
Posts: 4,358
Send a message via AIM to asshanson
Re: Race Parts..

.

Last edited by asshanson; 05-14-2009 at 02:25 PM..
asshanson is offline   Reply With Quote
Old 05-07-2009   #18
GREASEMONKEY
Banned
 
GREASEMONKEY's Avatar
 
Moon Lander Champion!
Join Date: Sep 2005
Location: MPLS
Drives: 92 TSi
Posts: 469
Send a message via AIM to GREASEMONKEY
Re: Race Parts..

Quote:
Originally Posted by 95tsi View Post
I called yesterday left a message and no return call. Interested in the seats. Please get back to me.
Returned call & left voicemail..

Quote:
Originally Posted by mike55112 View Post
stop by primo performance.
I would prefer if i was there, But thats where all the parts are if anyone is close and wants to come check something out. I will also be at the dyno day if someone wanted me to bring something.


There are about 5 people interested in the seats right now, First one with cash gets them.

-Stephan
GREASEMONKEY is offline   Reply With Quote
Old 05-07-2009   #19
turboimports
 
turboimports's Avatar
 

Join Date: Aug 2004
Location: St. Paul, Minnesota
Drives: DSM and Mitsu history
Posts: 444
Re: Race Parts..

Let me know about the fuel system. I'm ready to offer if it's what I want.
turboimports is offline   Reply With Quote
Old 05-07-2009   #20
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Race Parts..

Is the ignition box plug n play? Or do I have to hack up my stock harness to wire it in?
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:57 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.