MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > Project Talk

Reply
 
Thread Tools Display Modes
Old 09-28-2010   #21
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: Project Lex

Dyno it this weekend to get a nice baseline!
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is offline   Reply With Quote
Old 09-28-2010   #22
At-Least-It's-An-Evo
At-Least-It's-White-Again
 
At-Least-It's-An-Evo's Avatar
 
Mario Tetris 2 Champion! Tetris Champion! Tetris 2 Champion!
Join Date: Oct 2003
Location: Minneapolis, MN
Drives: 98 iVTEC
Posts: 2,371
Send a message via AIM to At-Least-It's-An-Evo
Re: Project Lex

Quote:
Originally Posted by Kracka View Post
Dyno it this weekend to get a nice baseline!
No point, it'll make a measley 180-190whp.
__________________
'04 Honda Ricer: stock

Done fuckin' with cars but I will snap some photos of yours for now! =)
At-Least-It's-An-Evo is offline   Reply With Quote
Old 09-28-2010   #23
mlomker
*Resting In Peace*
 
mlomker's Avatar
 

Join Date: Aug 2009
Location: Heaven
Drives: 94 Plymouth Acclaim/2008 EvoX
Posts: 2,430
Re: Project Lex

Quote:
Originally Posted by Halon View Post
Pretty sure I've already annoyed the hell out of Shane
We all do, in one way or another. lol.

Looks like a fun car! I have to laugh a little about your power goals--you make it sound like 600 is modest.
mlomker is offline   Reply With Quote
Old 09-28-2010   #24
At-Least-It's-An-Evo
At-Least-It's-White-Again
 
At-Least-It's-An-Evo's Avatar
 
Mario Tetris 2 Champion! Tetris Champion! Tetris 2 Champion!
Join Date: Oct 2003
Location: Minneapolis, MN
Drives: 98 iVTEC
Posts: 2,371
Send a message via AIM to At-Least-It's-An-Evo
Re: Project Lex

Quote:
Originally Posted by mlomker View Post
We all do, in one way or another. lol.

Looks like a fun car! I have to laugh a little about your power goals--you make it sound like 600 is modest.
It's a 2jz. 600 is about 'normal' if not on the lower side.
__________________
'04 Honda Ricer: stock

Done fuckin' with cars but I will snap some photos of yours for now! =)
At-Least-It's-An-Evo is offline   Reply With Quote
Old 09-28-2010   #25
A//// Guy
 
A//// Guy's Avatar
 
Bloody Seal Bounce Champion!
Join Date: Oct 2003
Location: South Burbs
Drives: Slowly
Posts: 9,870
Re: Project Lex

Yep, easy to make power, thats whats sweet about the platform.

You should name her Lexy instead of Lex. Lex is a man name. haha
A//// Guy is offline   Reply With Quote
Old 09-28-2010   #26
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Project Lex

Thanks all! I do plan on getting a baseline dyno. Was going to do it this weekend at the dyno day but can't because I have to go up north. So I'll just have to setup a quick little dyno session one of these days for a baseline.

Has anyone actually done back to back DB vs. MAP 2wd dyno tests to see how close they usually read?

As for the "modest" power goal, haha. It's still a lot of power for little old me. But yeah in the grand scheme of things it's probably modest because I'm not going to be shooting for 1000hp like a lot seem to do with these motors. 600-700 is plenty of fun for me.
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 09-28-2010   #27
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Project Lex

Quote:
Originally Posted by A//// Guy View Post
Yep, easy to make power, thats whats sweet about the platform.

You should name her Lexy instead of Lex. Lex is a man name. haha
I do need to come up with a name... Lex just came to mind quick, but yeah I need a good name. Something that can compare in coolness to the Green Dragon, and Saables
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 09-28-2010   #28
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Re: Project Lex

Quote:
Originally Posted by Halon View Post
Has anyone actually done back to back DB vs. MAP 2wd dyno tests to see how close they usually read?
We have had Mustangs dyno here and then the next day at Hi-Tech for a dyno day and be within a few HP. But weather conditions, strapping, gear used, etc change from day to day and you can get different numbers even on the same dyno. Turbo cars are probably a bit less consistent because the load on the car determines how much boost it makes, so ours versus the street versus a Dynojet can all be a bit different in the boost a turbo car makes. We dynoed about 10 cars here 2WD that we had previously dynoed at the old Elite 2WD on their Dynojet and the numbers were all within a few HP.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
Old 09-28-2010   #29
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Project Lex

Thanks for that info. The basis of my question mainly was if I did a baseline at MAP, and had DB tune it later, is that baseline still halfway valid to see what my gains were. And sounds like the answer is yes because in 2wd they read "close", or at least quite a bit closer than awd.

Car's been registered, and plates transferred to it. Drove it to work after lunch
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test

Last edited by Halon; 09-28-2010 at 01:21 PM..
Halon is offline   Reply With Quote
Old 09-28-2010   #30
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Project Lex

The mod purchasing has begun!! Mod list added to first post Going to keep as much purchasing of parts, services, etc... as local as possible using our awesome vendors we have here!! So another thanks to those vendors, and individuals who've helped me out in one way or another so far!!
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 09-28-2010   #31
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Project Lex

I've been trying to decide which tuning method to go, and have recently been talking a lot with a guy over on the lexus forums about a megasquirt system that he builds and runs on his car, and on a few others in his neck of the woods.

Anyone here have any first hand experience with any of the NEWER MS stuff? I know there's a lot of bad thoughts regarding the original MS, but I've heard some positive stuff regarding the newer versions.

Couple of the cons are that it's less widely used, so there might be less support for it, less people willing to tune it, less people capable of tuning it to it's full capability due to less on-hands experience with it. Not Plug-n-Play so harness modifications may be required unless I can find any kind of pigtail to go inbetween the two. Batch injection, this is a grey subject for me. I heard that because of this, it may have to idle a little rich, but I am no expert at that at all. Is batch injection going to really kill drivability, or is it workable? When setting up AEM systems, do people always pretty much use sequential?

Some pro's are it's about 1/3 of the cost of AEM. Don't need an external MAP sensor as it has one built in so you just run a vacuum line straight to the box. Would be wired in parallel with the ECU, not so that it acts as a piggyback, but rather acts in parallel with the ECU so that the ECU can still control A/C and stuff like that, while the MS box fully controls fuel, timing, 2-step, NLTS, knock, etc... The new TunerStudio software is supposedly pretty user friendly (from what I've read, no 1st hand experience here).

So I'm currently a little torn. If anyone has some first hand experience, or some useful input into AEM vs. MS, feel free to voice your thoughts as I'm still a ways out from ordering anything, and am all ears at this point as I'm just trying to gather as many facts and opinions for now to help me make a better educated decision when the time does come.

The guy who I've been speaking with, here's a clip of his SC300 running his MS setup (user name Shaodome over on club lexus, seems to be a bright guy):
http://www.youtube.com/shaodome

Some TunerStudio info:
http://www.efianalytics.com/TunerStudio/
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test

Last edited by Halon; 09-29-2010 at 12:11 AM..
Halon is offline   Reply With Quote
Old 09-29-2010   #32
FattyBoomBatty
Banned
 
FattyBoomBatty's Avatar
 

Join Date: Dec 2003
Location: Boulder, CO
Drives: Conquest
Posts: 5,049
Re: Project Lex

My car made less boost/horsepower at MAP last june and I hadn't changed anything from the previous month when I was at DB.
FattyBoomBatty is offline   Reply With Quote
Old 09-29-2010   #33
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
Send a message via AIM to turbotalon1g
Re: Project Lex

^hahaha.

I'd say talk to the guy who will be tuning your car.
I don't mind MS, but I've only seen the older stuff I think its a good product if you don't have any other choices, maybe a used AEM?
__________________
Aaron/brownman/big brown.
'91 Automagic.
'02 Z06
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 09-29-2010   #34
At-Least-It's-An-Evo
At-Least-It's-White-Again
 
At-Least-It's-An-Evo's Avatar
 
Mario Tetris 2 Champion! Tetris Champion! Tetris 2 Champion!
Join Date: Oct 2003
Location: Minneapolis, MN
Drives: 98 iVTEC
Posts: 2,371
Send a message via AIM to At-Least-It's-An-Evo
Re: Project Lex

Quote:
Originally Posted by turbotalon1g View Post
^hahaha.

I'd say talk to the guy who will be tuning your car.
I don't mind MS, but I've only seen the older stuff I think its a good product if you don't have any other choices, maybe a used AEM?
Used AEM's are still $1100-1300 from the supra/lexus guys.
__________________
'04 Honda Ricer: stock

Done fuckin' with cars but I will snap some photos of yours for now! =)
At-Least-It's-An-Evo is offline   Reply With Quote
Old 09-29-2010   #35
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Project Lex

The MS system from this guy is basically $750, and the TunerStudio software is free. Also no need to buy a MAP sensor as it has one in it from what he's said, so 1 less sensor to purchase.

My 2 biggest concerns at this point I think are:
1) having to actually splice into the harness
2) batch injector firing (again not sure if this is actually a huge deal, which is why i'm asking).


If I can find a way to be more comfortable with those 2 items, I may just go MS unless I am convinced otherwise.
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 09-29-2010   #36
FattyBoomBatty
Banned
 
FattyBoomBatty's Avatar
 

Join Date: Dec 2003
Location: Boulder, CO
Drives: Conquest
Posts: 5,049
Re: Project Lex

The fun of megasquirt is building it yourself, tuning it yourself and running it lean till it blows up. If you were ice racing this sc300, I would say totally do it. Now that you're ballin' with a toyota product, I'd get a motec ecu or something spendy like that. Megasquirt tech support is virtually non existant, so there's a huge learning curve. I built one once, and it connected to the computer and everything, but I never got it running on a car. I "tuned" a friend's MS setup to get the AFR's to a good enough spot.

Cliff notes: Easy, but dumb.
FattyBoomBatty is offline   Reply With Quote
Old 09-29-2010   #37
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Project Lex

The flip side of this is, I will not be building it. It is a build that another SC300-er has built and installed on a bunch of SC's, and has apparently got it running pretty well. I'd be buying it from him, and as such he would be the tech support. So it wouldn't be jumping in blindly, building something from scratch. There's actually working systems (working well according to him) already out there on these, which is why I'm even considering it.

Motec, umm... I'm pretty sure that will cost about the same as I paid for this car, so no. It's not some ballin car, it's an 18 year old lexus with 150k on it haha. I'm still a DSMer at heart, so $750 MS vs. $2000 AEM v2 is enough of a difference to make me take a step back and think.
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 09-29-2010   #38
Super Bleeder!!
Reynolds number user
 
Super Bleeder!!'s Avatar
 

Join Date: Oct 2003
Location: grove/tempe
Posts: 3,553
Send a message via AIM to Super Bleeder!!
Re: Project Lex

i vote used AEM
__________________
07 Ducati Monster S4R
00 honda elite 50 (64 mph braH!)
05 malaguti F15
04 E55 AMG
Super Bleeder!! is offline   Reply With Quote
Old 09-30-2010   #39
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Re: Project Lex

Hondata!
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
Old 09-30-2010   #40
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Project Lex

Did some basic maintenance crap to it. Replaced burnt out bulbs, check oil and coolant and they both look brand new. Replaced the cracked LCD screen, and the back lighting light bulbs (I'll put up some random pics of that repair later).

I have a little to-do list yet at home, but basic maintenance crap will continue over the rest of the fall, so it's ready for some "fun" work this winter.
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:42 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.