MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > Project Talk

Reply
 
Thread Tools Display Modes
Old 03-23-2018   #701
Murlo26
 
Murlo26's Avatar
 

Join Date: Dec 2009
Location: Lino Lakes
Drives: 17 Honda Accord
Posts: 4,041
Re: Meet GheyRay: Lower, Wider, Lighter!

The bose speakers in my dad's 06 vette seem decent. Not amazing but above average for a stock speaker. That's a bummer they cheap out there on a 55k+ car.
Murlo26 is offline   Reply With Quote
Old 03-23-2018   #702
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Meet GheyRay: Lower, Wider, Lighter!

Bose seems like the Fram of speakers now a days. Made a name for themselves awhile back, and just riding that brand names wave while now manufacturing crap.
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 03-23-2018   #703
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: Meet GheyRay: Lower, Wider, Lighter!

Quote:
Originally Posted by Murlo26 View Post
The bose speakers in my dad's 06 vette seem decent. Not amazing but above average for a stock speaker. That's a bummer they cheap out there on a 55k+ car.
C6 stereo is quite a bit nicer sounding than the C7's. The Volt Premium's Bose is actually pretty decent.
Quote:
Originally Posted by Halon View Post
Bose seems like the Fram of speakers now a days. Made a name for themselves awhile back, and just riding that brand names wave while now manufacturing crap.
HA! If anything, Fram is superior quality to Bose! The only Fram product that really sucks is their low-end ExtraGuard oil filter.
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is offline   Reply With Quote
Old 03-23-2018   #704
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Meet GheyRay: Lower, Wider, Lighter!

Wait a second... Fram is Bose, Bose is Fram! OMG!! Laces out!
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 03-23-2018   #705
A//// Guy
 
A//// Guy's Avatar
 
Bloody Seal Bounce Champion!
Join Date: Oct 2003
Location: South Burbs
Drives: Slowly
Posts: 9,870
Re: Meet GheyRay: Lower, Wider, Lighter!

lmao. The Bose in my 06 is mid 90s sounding, no bass at all, really tinny trebble. My 04 Audi A4 with Bose was nicer by far. C7 should be great.. my 2010 Terrain has the Pioneer stock system and it sounds great.
A//// Guy is offline   Reply With Quote
Old 03-23-2018   #706
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: Meet GheyRay: Lower, Wider, Lighter!

I too am happy with the Terrain's optional Pioneer system.
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is offline   Reply With Quote
Old 05-02-2018   #707
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: Meet GheyRay: Lower, Wider, Lighter!

Things not to do when parking at a hotel in Houston:
-run into concrete parking curb

Long story short, I misjudged how far to pull in and heard a nice CRUNCH/SCRAPE! I got out of the car and freaked out a bit...



After see that in the hotel parking lot I thought for sure the paint and splitter was ruined, cracked plastic, etc.

After doing some clean-up work and close inspection, turns out it's not so bad after all, luckily! No cracks in the plastic, just in the paint. I unbolted the splitter and adjusted it the best I could so it was flush after getting tweaked (it's held on with a combination of bolts and rivets). None of the fasteners were damaged and I didn't see any damage to the plastic splitter, again, only the cracked/scuffed paint.







Nevermind all the bugs on the bumper, after the drive to Houston and back the only cleaning I've done so far has been to the splitter. For now, I think I'm just going to leave well enough alone since it's bound to happen again with how low the car rides. Before drilling out the rivets to have it refinished I'll wait until the paint gets more damaged, starts chipping or flaking off, or gets smashed into a curb even worse.
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is offline   Reply With Quote
Old 05-02-2018   #708
A//// Guy
 
A//// Guy's Avatar
 
Bloody Seal Bounce Champion!
Join Date: Oct 2003
Location: South Burbs
Drives: Slowly
Posts: 9,870
Re: Meet GheyRay: Lower, Wider, Lighter!

Not bad, hardly noticeable after you cleaned it up!
A//// Guy is offline   Reply With Quote
Old 05-02-2018   #709
Murlo26
 
Murlo26's Avatar
 

Join Date: Dec 2009
Location: Lino Lakes
Drives: 17 Honda Accord
Posts: 4,041
Re: Meet GheyRay: Lower, Wider, Lighter!

I feel like that is a corvette staple, scraping things and hitting the splitter. I know that is a step up from previous corvettes but it was almost impossible not to scrape the front in my dads c6, but I think that was just the undertray deal.
Murlo26 is offline   Reply With Quote
Old 05-02-2018   #710
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: Meet GheyRay: Lower, Wider, Lighter!

Quote:
Originally Posted by A//// Guy View Post
Not bad, hardly noticeable after you cleaned it up!
I agree, thanks!
Quote:
Originally Posted by Murlo26 View Post
I feel like that is a corvette staple, scraping things and hitting the splitter. I know that is a step up from previous corvettes but it was almost impossible not to scrape the front in my dads c6, but I think that was just the undertray deal.
The rubber air dams in front of the front tires scrape on damn near everything, including my relatively flat driveway apron. Those pieces are very flexible though and are even mentioned in the owners manual and being designed to flex and take an impact from the expected frequent contact. A little swipe with tire shine and they still look good as new, for the most part.
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is offline   Reply With Quote
Old 05-04-2018   #711
Goat Blower
aka Goodbye
 
Goat Blower's Avatar
 
Asteroids Champion! Beach Squirter Champion!
Join Date: Oct 2003
Location: under the car
Drives: Taylor Made R15
Posts: 7,765
Re: Meet GheyRay: Lower, Wider, Lighter!

The factory stereo in my C6 is absolute junk. I ended up buying some decent 6.5 components and made adapter plates for them. But then again, the Bose system in my Tahoe sounds fantastic, so they do some of them right.
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie

Goat Blower is offline   Reply With Quote
Old 08-14-2018   #712
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: Meet GheyRay: Lower, Wider, Lighter!

The itch was strong so I had to get something ordered up for the 'Vette before next weekend's annual Shreveport cruise!

I stumbled upon the TMC performance shifter box and knew it was something that fit my needs perfectly since it retains the factory components, just removes the slop (much like my prior stock shifter mods/tweaks did, this just takes it a step further) with a billet end-cap and metal bearings.

https://www.corvetteforum.com/forums...ter-boxes.html

There are 3 bushing options: polyurethane, Delrin, & metal. I already have polyurethane in the car (replaced the squishy factory rubber) so I opted for the Delrin so I could compare the two. I want to keep noise and vibration down so I do not have any interest in the metal. It should be here on Thursday and I hope to have it installed this weekend.
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is offline   Reply With Quote
Old 08-14-2018   #713
A//// Guy
 
A//// Guy's Avatar
 
Bloody Seal Bounce Champion!
Join Date: Oct 2003
Location: South Burbs
Drives: Slowly
Posts: 9,870
Re: Meet GheyRay: Lower, Wider, Lighter!

Oh nice! Mine has lots of slop too, dont think anythings been done to it. Ill look into that too.
A//// Guy is offline   Reply With Quote
Old 08-14-2018   #714
asshanson
immune from paybans
 
asshanson's Avatar
 

Join Date: Oct 2005
Location: West Des Moines
Drives: poorly
Posts: 4,358
Send a message via AIM to asshanson
Re: Meet GheyRay: Lower, Wider, Lighter!

Peter I think you have the c6 z06 setup which is much better than the base. I believe it uses plastic instead of rubber bushings. But that was 6 years ago so I might be wrong haha.
asshanson is offline   Reply With Quote
Old 08-14-2018   #715
A//// Guy
 
A//// Guy's Avatar
 
Bloody Seal Bounce Champion!
Join Date: Oct 2003
Location: South Burbs
Drives: Slowly
Posts: 9,870
Re: Meet GheyRay: Lower, Wider, Lighter!

Hmm ill have to take a look, not sure the differences. Sure feels a bit looser than Id like. Twss haha

EDIT: looks like all C6 shifters are the same, some Z years had no rubber bushings between the torque tube and the shifter, so they vibrated more. That was revised to all rubber later years. Either way all the shifter seem to wear out and slop over time.

Last edited by A//// Guy; 08-14-2018 at 04:12 PM..
A//// Guy is offline   Reply With Quote
Old 08-15-2018   #716
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: Meet GheyRay: Lower, Wider, Lighter!

This shifter box is compatible with all years C5/6/7. I'll let you know my thoughts, but at $125 I think its a no-brainer! Peter is correct on all the shifter boxes being identical with only the bushings being different (early C6 Z06 came solid metal, but then were revised to rubber just like all the other C5/6/7 models).

I'm torn which bushings to use though, my currently installed polyurethane or the Delrin I'm getting with the box (he supplies your choice of polyurethane, Delrin, or metal). He says his favorite all-around is the Delrin, but I am slightly concerned with it being such a rigid material with minimal give of dampening.
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is offline   Reply With Quote
Old 08-15-2018   #717
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: Meet GheyRay: Lower, Wider, Lighter!

Here are his 3 threads, all basically the same, but a little different info in each so I did find is beneficial to read through all of them.

C5: https://www.corvetteforum.com/forums...ter-boxes.html
C6: https://www.corvetteforum.com/forums...ter-boxes.html
C7: https://www.corvetteforum.com/forums...ter-boxes.html

These are the bushings I currently have: https://www.zip-corvette.com/97-19-s...-bushings.html
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is offline   Reply With Quote
Old 08-15-2018   #718
Murlo26
 
Murlo26's Avatar
 

Join Date: Dec 2009
Location: Lino Lakes
Drives: 17 Honda Accord
Posts: 4,041
Re: Meet GheyRay: Lower, Wider, Lighter!

I am old now, so my vote is for the one that gives the most rigidity without being annoying as hell. So might not be Delrin.

How big of a pain is it to swap the bushings if you don't like? If it's easy I'd say start with his recommendation and change if it sucks.
Murlo26 is offline   Reply With Quote
Old 08-15-2018   #719
A//// Guy
 
A//// Guy's Avatar
 
Bloody Seal Bounce Champion!
Join Date: Oct 2003
Location: South Burbs
Drives: Slowly
Posts: 9,870
Re: Meet GheyRay: Lower, Wider, Lighter!

Good info! I would think the delrin and poly would be very similar, they are both pretty dense but still have some dampening compared to solid metal mounts.
A//// Guy is offline   Reply With Quote
Old 08-15-2018   #720
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Meet GheyRay: Lower, Wider, Lighter!

Peter can you go ahead and purchase/install those before you sell me the car?
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:23 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.