MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > Project Talk

Reply
 
Thread Tools Display Modes
Old 03-15-2018   #1
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
2g street/cruiser build

Here we go again on another build thread. This is the girlfriends build and car that I am documenting since she is not on here. Little history on the shell we picked up, originally from Michigan and is rust free with a full cage. The car itself has been sitting for who knows how long and has not been touched really untill we got ahold of it, had no interior and was basically stripped. So far here is what we have done: Stripped engine bay, sanded and resealed then painted, subframes have been sand blasted then powdercoated with solid bushings installed, all new suspension parts with almost all bolts, wheel wells undercoated with por15, full interior installed, and a ton more work. As for a mod list here it is and it will change as time goes on but as for now she is going to run this setup and see what we can do with it.

Engine :
Stock 7 bolt bottom end 97-99 balance shafts deleted
7 bolt head, evo behive springs, fp2 cams

Drivetrain :
Stage 2 bushwacker trans, welded center diff
Act sprung 6 puck clutch
Solid subframe bushings
Solid driveshaft carrier bushings
Solid diff bushings
Enkei RP01 17x8 with mt et streets
Everything else is stock

Turbo :
Big evo3 16g externally gated
2g exhaust manifold
Bnfab side exit exhaust
Tial 38mm wastegate

Bolt-ons :
Evo 3 intake manifold
1g na throttle body
Vrsf front mount
Tial bov
Small battery kit
Avid engine mounts

Fuel :
Pte 1000cc injectors
Walbro 255

Engine management:
Dsmlink v3
Speed density

There more i am missing but for being the girlfriends car this will be a perfect setup for her as she just wants a nice cruiser for nice days with occasional track days and Mexico days.
Attached Thumbnails
Click image for larger version

Name:	4E3C886E-5B0A-41D3-9B88-F5B7EC6427D0.jpg
Views:	402
Size:	1,012.6 KB
ID:	16951   Click image for larger version

Name:	60308F47-0FF1-4FE6-9C7E-3BD084E27639.jpg
Views:	96
Size:	1,012.3 KB
ID:	16953   Click image for larger version

Name:	6553F63D-DC48-41E9-A534-DC4582C7F213.jpg
Views:	98
Size:	688.7 KB
ID:	16954  

__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph

Last edited by dsmDolney; 07-19-2018 at 11:49 PM..
dsmDolney is offline   Reply With Quote
Old 03-15-2018   #2
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,885
Send a message via AIM to turbotalon1g
Re: Dsmdolney’s street/drag build

Nice. Should be a fun year with all the 16G cars out.

Are you planning to take a lot of weight out of the car?
__________________
Aaron/brownman/big brown.
'91 Automagic.
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 03-15-2018   #3
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

Quote:
Originally Posted by turbotalon1g View Post
Nice. Should be a fun year with all the 16G cars out.

Are you planning to take a lot of weight out of the car?
The spare wheel well is already cut out so that shaved some weight, ac is all removed and some small other things.
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph

Last edited by dsmDolney; 06-24-2018 at 02:25 PM..
dsmDolney is offline   Reply With Quote
Old 03-15-2018   #4
Fran05
 

Join Date: Sep 2007
Location: Minnesota
Drives: DSM
Posts: 318
Re: Dsmdolney’s street/drag build

10s on 7 bolt rods? Man, you will ruin the day for everyone else with oil and engine leftovers all over the track. J/K, good luck with the build!
Fran05 is offline   Reply With Quote
Old 03-15-2018   #5
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

Quote:
Originally Posted by Fran05 View Post
10s on 7 bolt rods? Man, you will ruin the day for everyone else with oil and engine leftovers all over the track. J/K, good luck with the build!
Yea we will see what i push with a stock bottom end it wont be enough to run 10s thats for sure lol. We will try to get there when i get my built short block
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
dsmDolney is offline   Reply With Quote
Old 03-15-2018   #6
SlowWhite
Been there, done that.
 
SlowWhite's Avatar
 

Join Date: Oct 2003
Location: Camden, S.C.
Posts: 3,235
Send a message via AIM to SlowWhite
Re: Dsmdolney’s street/drag build

Nice another Michigan car. My transporter left 40min to go get mine.

Can't wait to see the build thread progress on yours.
__________________
1997 GSX - new ride
1997 GSX - dedicated track car
2004 R6 - sold
1992 GSX - sold
1996 GST - sold
1995 GSX - sold
Best 1/4 - 11.7 on 93oct
Best 1/4 MPH - 120mph
SlowWhite is offline   Reply With Quote
Old 03-16-2018   #7
Alpha D
Got Boost o_O'' m
 
Alpha D's Avatar
 

Join Date: Sep 2009
Location: In a house
Drives: 1991 Eagle Talon TSI AWD Spooling Fiddy Trim Style
Posts: 1,389
Re: Dsmdolney’s street/drag build

16G that is interesting, i just picked up another 16G my self in anticipation of downgrading and enjoying the car more then making all this whp but wrecking transmissions every other race day. Did the car come with the components already blasted or did you do that? I believe you did...where did you get that huge frame blasted? Would be nice to get that done one of tehse days, and upgrade the bushings ect if the car dosnt sell before.
Alpha D is offline   Reply With Quote
Old 03-16-2018   #8
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

I got them blasted and powdercoated myself then installed the bushings
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
dsmDolney is offline   Reply With Quote
Old 03-16-2018   #9
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,885
Send a message via AIM to turbotalon1g
Re: Dsmdolney’s street/drag build

LMAO whats the issue with 10s on a 7 bolt? this is 2018.
__________________
Aaron/brownman/big brown.
'91 Automagic.
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 03-16-2018   #10
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

Some new parts showed up today which included a na 1g throttle body, jmfab small battery tray, and new valvecover with an fitting for the catch can. All installed now to just wait for the rest of the stuff to show up
Attached Thumbnails
Click image for larger version

Name:	D80E3CFC-AEA9-4CE6-8F89-F5405B6EFD74.jpg
Views:	90
Size:	1,010.4 KB
ID:	16956  
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph

Last edited by dsmDolney; 06-24-2018 at 10:14 AM..
dsmDolney is offline   Reply With Quote
Old 06-24-2018   #11
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

Got alot of stuff done tonight to wrap this thing up. Got the fuel lines all done and everything hooked up, installed and wired in the aem gauges, installed the jay racing alternator relocation, and a bunch more misc things that needed to be done. Slowly getting there.
Attached Thumbnails
Click image for larger version

Name:	01DFF620-54F5-4080-A72B-6DDE73B20BD2.jpg
Views:	55
Size:	1,003.4 KB
ID:	17120   Click image for larger version

Name:	2BE6CD1D-8E82-4E26-92C4-DC906445BD60.jpg
Views:	49
Size:	990.9 KB
ID:	17121  
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph

Last edited by dsmDolney; 09-05-2018 at 11:54 PM..
dsmDolney is offline   Reply With Quote
Old 06-24-2018   #12
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,885
Send a message via AIM to turbotalon1g
Re: Dsmdolney’s street/drag build

Looks good man, who did the welding on the VC for you?

It looks really close.
__________________
Aaron/brownman/big brown.
'91 Automagic.
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 06-24-2018   #13
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

Quote:
Originally Posted by turbotalon1g View Post
Looks good man, who did the welding on the VC for you?

It looks really close.
bought the valve cover with the fittings welded on already so not exactly sure who did it.
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
dsmDolney is offline   Reply With Quote
Old 07-19-2018   #14
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

Fenders, hood, front bumper all mounted up and still have to make a heat sheild for the side exit exhaust. Trying to make this thing ready for the cookout so we are trying to bust it out now.
Attached Thumbnails
Click image for larger version

Name:	D7F022E0-2561-4B83-9CA2-07BE18D8155A.jpg
Views:	41
Size:	848.3 KB
ID:	17165  
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
dsmDolney is offline   Reply With Quote
Old 09-05-2018   #15
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

Well we wrapped up the engine bay tonight, all that is left is fluids and we are ready to start it. We hope to make it to Pg with the car next weekend but it will be cutting it close.
Attached Thumbnails
Click image for larger version

Name:	10725429-ADAE-4F73-B047-3CB33AF46EA3.jpg
Views:	20
Size:	997.7 KB
ID:	17221  
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
dsmDolney is offline   Reply With Quote
Old 10-06-2018   #16
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

Some billet goodness. Dont mind the nasty clamps they will be replaced
Attached Thumbnails
Click image for larger version

Name:	36549762-A04D-4A53-A644-58CC62FDA183.jpg
Views:	20
Size:	795.1 KB
ID:	17243  
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
dsmDolney is offline   Reply With Quote
Old 10-10-2018   #17
dsmDolney
 
dsmDolney's Avatar
 

Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 677
Re: Dsmdolney’s street/drag build

The car is a rollin. Few small things that need to be addressed then we will look into getting dyno time to see what this little 16g can put down. Also in the near future I plan on swapping coilovers in instead of the kyb / megan shock and spring setup we have in it now which sits way to low for me.
Attached Thumbnails
Click image for larger version

Name:	7315AA9A-4E7E-4ED3-9B60-8B166CDAB70F.jpg
Views:	21
Size:	970.8 KB
ID:	17247   Click image for larger version

Name:	6134ADEA-D127-4E5E-A341-3FC4D87AA744.jpg
Views:	20
Size:	875.6 KB
ID:	17248   Click image for larger version

Name:	7D4EA47F-9B76-4B43-8253-B393BF1FC366.jpeg
Views:	20
Size:	193.6 KB
ID:	17249  

__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph

Last edited by dsmDolney; 10-10-2018 at 05:12 PM..
dsmDolney is offline   Reply With Quote
Old 10-11-2018   #18
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,743
Re: Dsmdolney’s street/drag build

Anybody else have issues opening the attachments?

From the little thumbnails it looks really clean and well done
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Old 10-11-2018   #19
AwdGSX13
 
AwdGSX13's Avatar
 

Join Date: Mar 2006
Location: Minnesota
Drives: Cars
Posts: 1,453
Re: Dsmdolney’s street/drag build

Quote:
Originally Posted by C3L1CA View Post
Anybody else have issues opening the attachments?

From the little thumbnails it looks really clean and well done
attachments have not worked in some time it seems. Not sure what the deal is.
__________________
-Matt



'94 Eagle Talon TSI AWD
'06 Acura TL
AwdGSX13 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:01 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.