MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Classifieds > Mitsu vehicle parts for sale

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-18-2018   #1
CarPsyco84
 
CarPsyco84's Avatar
 

Join Date: Jan 2005
Location: Coon Rapids
Drives: 07' Z06, 16' Beta 300RR
Posts: 804
FS: 1g 600ish whp awd part out

So sawing my motor in half was the last straw. I am getting out of dsm's and moving on to bigger and better things. My failures are your boon's. I have a multitude of parts that need to go to good homes. Prices are all OBO.

First stuff is almost brand new, only a couple hundred miles on this:
2150cc Hi-Z FIC injectors have the data sheet/link info/plug&play -sold
Fluidamper, still have the box and the certs -sold
FuelLab 81831-1 black, 6 micron fiberglass -sold
Zaklee Clear timing belt cover -sold
Freshly reworked bolt-on O2 w/tial 38mm, has a 3" marmon flange? -sold
Southbend SS-X clutch kit 6puck un-spring clutch disk with (2700 lb) pressure plate, - $200 dropped


***This stuff has approx 1k miles in like new condition
ETS race 4" Intercooler back door -sold
FP Black with ported exhaust housing journal bearing (will come with water and oil lines everything to bolt up -sold
FP 4" cast intake tube/filter, no extra lines to it, could add some if desired - $50 - dropped
17" x 9" +45 Bronze Enkei RPF1's with 255/40/17 ZII star spec's, barley worse the nubs off the tires, wheels were brand new when I got them. Can give you the spacers I ran to make them fit a 1g if desired. -$1400 - dropped

***Other used items:
Muellerized JiC's absolutely awsome on these cars and no longer available. - sold
Shep stage 3 w/4 spider 91-94 AWD trans. Always ran the OEM evo 6spd fluid. -sold
REEF street intake (handmade prototype only 3 or 4 exist better than the others) - sold
ACT street light flywheel $50 - dropped
23 Spline Transfer cases $100 (got 2)
22 spline Transfer case (alum headed one) $80 - dropped
L19's -sold
External Oil cooler set up with push lock lines (comes with ported ofh and everything else to make it work) -sold
3.5” catback ss exhaust with magnaflow muffler $125 - dropped
Carbon Hood w/Vent $100

New to list:
ARC-2 Box with plug and play wiring kit and bracket $200
6 bolt head with Evo beehive valve springs and retainers and BC280s $350
I havea stock 6 bolt heads $100
ACE 140 Amp Alternator, has 100 miles on it $60
1G green top CAS $40
1G coil with block bracket I rewired the power wire with larger wire to lower the resistance to the primary $40
1G ignition coils (got 2 more) $20

Got a bunch of other odds and ends as well, like, couplers, water cooled OFH, couple stock 6 bolt oil pans.


Free stuff:
PTE 3076r BB with blown bearings, pretty sure the shaft is bent, housings don't look wrecked.
Have 3 oil pump plates, 1 was brand new before the carnage, 1 came from a running engine (not mine).
Various timing system parts, have at least 2 good tensioners, idler pullies, tensioner pullies,
Got a new water pump, and a used one, neither leaked.
1 end cover with a newer seal in it.
Stock intake manifold.
NGK Plug wires
Non-EEPROM ecu
All the spark plug options you could ever want. BPR8es, br8es, br7es, bpr7es, br8eix
Almost new manual AWD starter plate
Got various pullies and timing covers I just want gone.

Text/call me at 651-245-2218.
__________________
-When in doubt, Moar RPM.

Last edited by CarPsyco84; 09-13-2018 at 08:40 PM.. Reason: additions and price drops
CarPsyco84 is offline   Reply With Quote
 

Tags
1ga, awd, fp black, part out

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:28 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.