91 Galant VR4

Pushit2.0 · 08-17-2009

I will update as needed.

~John

awd-drifter · 08-17-2009

awesomeness!!

Forced Fed · 08-17-2009

What are your plans for it? I stumbled across your part out thread of this car when searching one time... Are you going for big power again?

Pushit2.0 · 08-17-2009

I have most of the parts I sold off the car back. I think the GT4202 and 8 160lb/hr injectors are a little insight into the plans.

~John

Kevin 1G Drummer · 08-17-2009

Awesome! I'm glad to see you're gonna continue this project!

john · 08-17-2009

Better get it back together soon. Fast Mark could use another loss in his new 95 cobra.

niterydr · 08-17-2009

Ahh it sleeps at home, congrats!

TkrPerformance · 08-17-2009

way to go it is going back together

1QUICK4 · 08-17-2009

Sawheat!

turbotalon1g · 08-17-2009

GT4202, so 10s on pump. But we all know it will never see 92, so what is the plan big man?
Congrats, excited to see what becomes of this.

FattyBoomBatty · 08-17-2009

No you can't have the BOV or the wastegate back, I'm using them!

I'm excited to see what becomes of your galant.

Pushit2.0 · 08-17-2009

As of now I am thinking E-85 and less then 30psi. I am going threw the head right now, and making the exhaust and intake manifold for it. Then I am going to get it on the engine dyno at work to sort out any issues while I figure out the tranny and clutch situation.

~John

Pushit2.0 · 08-24-2009

I did get a little work done to the race SMIM this weekend.

This is the short block waiting for the head.

~John

niterydr · 08-24-2009

Looking good!

Pushit2.0 · 08-24-2009

The port job on the head was touched up, the valves are ground, and the valve job should be done in the next couple of days. Then shim the springs a little tighter, 1 exhaust rocker came off and almost put a hole in the head. Then deck it and bolt it back down. I will be working on the exhaust manifold Tuesday tonight.

~John

Super Bleeder!! · 08-24-2009

Quote:

Originally Posted by Pushit2.0

tranny and clutch situation.

~John

go automatic!

Pushit2.0 · 08-25-2009

I have an auto, and am thinking about it a lot. The AEM should be able to control it.

~John

sleepydsm · 08-25-2009

I'm glad to see a big project in the works. Good luck, can't wait to see a beast.

niterydr · 08-25-2009

Quote:

Originally Posted by Pushit2.0

I have an auto, and am thinking about it a lot. The AEM should be able to control it.

~John

Go Auto. If member serves correct there are enough controls for the automatic for the AEM to control it without a seperate box.

Worst case scenerio is we build a ecm to control the transmission based on a signal from the AEM (or a paddle shifter setup).

Do ett...shifting is lame when all you are trying to do is keep it straight.

awd-drifter · 08-25-2009

awesome. For some reason I just love the sound of fast auto DSM/GVR4! great work man!