Make your appointment!

**JET** · 09-11-2008

Well, I lost my full time job, so I will be focusing in the shop until I find another one. I have 3 bays available in the shop and I can do pretty much anything. I focus mainly on SS intakes, exhaust pipine and IC piping. I have been doing a fair amount of maintenance lately also.

I have one car in the shop right now, but that will be out soon. Shop rate is $50/hr (compare that to the competitors!) and I do very good work. I have had DSM's since '94, so I know my way around them well. I also do piping for other cars, but will only do maintenance on DSM's.

I have MIG and TIG welders, 50 ton air operated press, air tools, etc. I also have a truck and trailer with electric winch if your car is not running, I can pick it up. You can PM me, post in this thread or call me at 651-308-1672 (leave a voice mail if I don't answer, reception in the shop sucks). I am located on the Blaine/Ham Lake border by Lexington and 35W.

95talonracer · 09-11-2008

Great work and love the SS piping!!

C3L1CA · 09-12-2008

I'll probably have to swing up there for an exhaust after I get my car running.

Have a rough idea on how much a 3" SS exhaust would cost if I supplied the muffler? The car is a 2g awd and it has a megan 3" down pipe on there already.

turbotalon1g · 09-12-2008

I would like app. to kick your ass, also for you to take a look at my current piping and maybe get some ideas for it.
On a side note i have a ton of 4" S bends i believe to be SS metal, i will bring one if come by or show you if you come by, neighbor.

**JET** · 09-12-2008

I'll spar with you for only $25/hr, brown. You have a sign a waiver first though.

I'll be around all next week, just give me a ring.

turbotalon1g · 09-12-2008

lol, ok will do. mondays or fridays for me i have school otherwise.

95talonracer · 09-12-2008

Can you redo all of the hangers on my exhaust and DP and they are all SS.

**JET** · 09-12-2008

I can do that.

t_92r · 09-13-2008

Jet does a pretty good job. Got my 1g head ported and it looked good. Would recommand.

2bar1g · 09-21-2008

Still offering the porting sevices? Looking to get the full port for my 16g.

**JET** · 09-22-2008

Yes, I still port. I have a head coming in this week and am finishing up a turbo right now (along with a HG swap).

john · 09-29-2008

Remove cats and weld in test pipes dodge viper???

**JET** · 09-30-2008

Publicly, no

That is illegal and I would never do such a thing.

john · 09-30-2008

The car is for off road use only

. I may PM you soon. I am consdering exhaust this winter.

eclipse_spyder · 10-01-2008

Can you pull out the valve guides in my head and install new ones? If so, how much? Also how much for porting the bowls so I can run 1mm oversize valves?

**JET** · 10-01-2008

Sorry, those are both machine shop procedures. For the oversized valves you just need the seats cut bigger, not ported. I would check out Motors by Gosh, he does good work for a good price.

On a side note, the last car I have scheduled will be out of the shop tomorrow, so I have some free space if someone needs some work done! I should run a head gasket special or something, I have done 3 of them in the last month

cudvig · 10-04-2008

I was wondering If you could make some time for me and make a complete exhaust system for my 2004 volvo S60R?

would I need to bring it in and have you look at it?

could it be 3 inches?

and finally, could you PM me an estimated cost too?

if so I would like a basically stock looking system just bigger for better spool up and more gains, thats all.

thanks,
Colin