My Winter Upgrades - Page 4

**Halon** · 01-23-2008

As far as the exhaust side goes, it's the smaller of the 2 exhaust wheel options. Here are all the specs I believe it is. I just wrote them asking for verification of it all.

Compressor Wheel: inducer-62mm / exducer-84.6mm / 54 trim
Exhaust Wheel: inducer-76.1mm / exducer-66.7mm / 77 trim
Exhaust Housing: .70 A/R, T3 inlet, V-Band outlet

Compressor map attached below. Also I'll post up a map of a .70 A/R GT35R for comparisons sake.

**Halon** · 01-23-2008

Also I was going to mention that it is oil cooled as well which I really like because of simplicity in the engine bay. Less lines going places =

mdost03 · 01-23-2008

That's a very sweet turbo man

FattyBoomBatty · 01-23-2008

Quote:

Originally Posted by Halon

Also I was going to mention that it is oil cooled as well which I really like because of simplicity in the engine bay. Less lines going places =

How are you going to plug the water lines from the origional setup then?

Also, are you ceramic coating both the manifold and exhaust housing?

**Shane@DBPerformance** · 01-23-2008

That's a pretty big exhaust wheel, should make some power.

**Halon** · 01-23-2008

Quote:

Originally Posted by FattyBoomBatty

How are you going to plug the water lines from the origional setup then?

Also, are you ceramic coating both the manifold and exhaust housing?

The last setup was oil cooled also.

And yes, I'm having that Form and Function place in St. Paul coat my manifold and exhaust housing.

**Halon** · 01-23-2008

Also, just picked up the aluminum from Discount Steel to start building my intake manifold.

Kevin 1G Drummer · 01-23-2008

Sweet! Keep us posted on your progress on the Manifold.

**Halon** · 01-25-2008

I will keep you posted on the manifold progress.

I did just pick up my new Fidanza 4.3 clutch from MAP, thanks guys!

**Halon** · 02-07-2008

Just received and installed the new CF hood today. I'd have pics but my digi cam is busted, and Derek's ran out of battery.

Also I started on the intake manifold. I have the runners cut, and have begun working on the plenum/runner flange.

FFPerformance · 02-08-2008

Looking good B. I know we talked a little about your build but after reading this, you were holding out on me

**Halon** · 02-08-2008

Thanks man. Nah I wasn't holding out, just not trying to toot my horn to you.

Here's the pics of the stuff I got coated from FFP.
http://server6.theimagehosting.com/a...hp?album=31608
Happy with how it turned out. Can't put it on yet though because I realised I had no fittings for the oil lines. I want to wait for those fittings before putting this all on.

Also since I'm going to Spain here in a week or so, the car probably won't be up and running until this Spring.

**Halon** · 02-11-2008

Update with some pics.

turbotalon1g · 02-11-2008

Looking good man.

**Halon** · 02-11-2008

The new hood somewhat on.

b00stcreep21 · 02-11-2008

Oh snap, JDM fiber. Lookin good dude

TkrPerformance · 02-11-2008

looks good
you need to get the carbon pop ups also

**Halon** · 02-11-2008

That and I need some different rad fans since I had to remove one because the turbo gets in the way.

**Shane@DBPerformance** · 02-11-2008

Shouldn't need too much for fans with that radiator and E85.

**Halon** · 02-11-2008

That's what I hear. Except I experienced a much different thing from that, while trying to keep my car from overheating all last year.

http://www.dsmstyle.com/forums/showt...ht=running+hot