MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Classifieds > Mitsu vehicle parts for sale

Reply
 
Thread Tools Display Modes
Old 10-29-2012   #1
awdxtc
 

Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
Parting out my 90 AWD

It is with great regret I am even considering doing this. I am a full time student and I recently lost my job. I am also trying to get engaged...long story short I am just really low on funds and I have a lot of expenses. I am parting out my 90 awd eagle talon. The prices on the parts are negotiable but not by much as I have shaved money ( in some cases a lot of money) off every part. I have the prices listed but if you want say an entire long block we can work that out, etc. Every part is brand new, ZERO miles and run time. I don't have the car it self listed for sale but I would sell it if someone made me a good offer. It only has 54K on the chassis. If you buy the shortblock I will leave the oil pan on it for 50 bucks it cost me like $200 and I am selling it for $100 buy itself. There maybe things I left out or for got about. You can message me on here with any questions. Please no low ball offers...no I will not sell my dog box for $2000 etc.



Buschur Stage 3 short block $3,000.00 GRP Aluminum Rods, JE pistons, Knife Edged Crank, Bored .030 over

Buschur Race Front mount intercooler $600.00 3 inch inlet and outlet

MSD DIS-2 ignition $400.00

Tial Blow off valve (2) $500.00 ($250 each)

1G Motor Mounts $70.00 New OEM

Front cover assembly Buschur Racing $120.00

ARP head studs $80.00

Alternator relocation kit $100.00

1G AEM EMS (includes wideband) $1000.00

Tial 44MM wastegate (2) $500.00 ($250 each)

1G water pump $45.00

1G $65.00

1G OEM damper $70.00

New 6 Bolt Oil Pan $100.00

Fox Lake Cylinder Head $2,300.00 Ferrea 1 MM over sized valves, Ferrea dual valve springs CNC 5 axis ported

Shep Racing Dog Box Transmission $5500.00 PPG custom straight cut gears (cryogenically treated) bead blasted case (sold pending funds)

Tilton Clutch $4600.00 Carbon Fiber disks, uses a hydraulic release bearing (replaces slave cylinder)

Driveshaft Shop HD driveshaft $650.00 Aluminum driveshaft 3.5” (sold pending funds)

Driveshaft Shop Front axles $530.00 Rated to 650 horse power (sold pending funds)

Driveshaft Shop Rear axles $1,100.00 Rated to 900 horse power (sold pending funds)

Shep Racing Transfer case $1500.00 Cast iron hosing, upgraded output shaft

Custom Ground Crane Cams $900.00 Same cams John ran 7's on

Shearer Fabrications GT4202R Turbo $1300.00 1.15 AR

Tubular Top Mount T4 Manifold Shearer Fabrications $1,200.00

Custom 3.5” Exhaust Shearer Fabrications $1300.00

Custom Fuel sump Shearer Fabrications uses oem fuel tank $200.00

Custom Aluminum intercooler piping Shearer Fabrications $600.00

Fic 2150 injectors $650

Weldon 2025 fuel pump $650

Weldon 10 micron and 40 micron fuel filters $80 each or $130 for the pair

Weldon dial a flow fuel pump controller $400
awdxtc is offline   Reply With Quote
Old 10-29-2012   #2
Super Bleeder!!
Reynolds number user
 
Super Bleeder!!'s Avatar
 

Join Date: Oct 2003
Location: grove/tempe
Posts: 3,553
Send a message via AIM to Super Bleeder!!
Re: Parting out my 90 AWD

That is one serious parts list!
__________________
07 Ducati Monster S4R
00 honda elite 50 (64 mph braH!)
05 malaguti F15
04 E55 AMG
Super Bleeder!! is offline   Reply With Quote
Old 10-29-2012   #3
DSMFreak
New Member
 

Join Date: Jun 2012
Location: New Brighton
Drives: P.O.S. beater, soon to be Evo 8
Posts: 12
Re: Parting out my 90 AWD

Is this the black and silver 1ga talon? Love this car
DSMFreak is offline   Reply With Quote
Old 10-29-2012   #4
4seasons69
 
4seasons69's Avatar
 

Join Date: Apr 2007
Location: Circle Pines
Drives: 1992 talon tsi 1995 corolla
Posts: 2,048
Re: Parting out my 90 AWD

Pm'd
4seasons69 is offline   Reply With Quote
Old 10-29-2012   #5
awdxtc
 

Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
Re: Parting out my 90 AWD

Quote:
Originally Posted by DSMFreak View Post
Is this the black and silver 1ga talon? Love this car
Yes it is. PM replied
awdxtc is offline   Reply With Quote
Old 10-29-2012   #6
punxnotdead185
 

Join Date: Jun 2010
Location: Oakdale, MN
Drives: 95 AWD Mirage Coupe with AIDS
Posts: 230
Re: Parting out my 90 AWD

OMG, why can I win the lottery right now, might be interested in the alt relocation kit, I'm assuming that doesn't come with an alternator, does it use a OEM one or like a Saturn one or something?
punxnotdead185 is offline   Reply With Quote
Old 10-29-2012   #7
awdxtc
 

Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
Re: Parting out my 90 AWD

Quote:
Originally Posted by punxnotdead185 View Post
OMG, why can I win the lottery right now, might be interested in the alt relocation kit, I'm assuming that doesn't come with an alternator, does it use a OEM one or like a Saturn one or something?
No it does not, it uses an oem unit.
awdxtc is offline   Reply With Quote
Old 10-29-2012   #8
Mark Leasure
 
Mark Leasure's Avatar
 

Join Date: Aug 2006
Location: eagan
Posts: 898
Re: Parting out my 90 AWD

That’s too bad, I hate to see part outs. Give me a heads up if the dog box deal falls through.
__________________
Slowest: 2017 Corvette Z06 - Z07 Trim
Fast: EvoIX SE – Blouch 2.0xtr turbo – E85
Faster: Evo IX MR –PTE6266 – E85 –823WHP 9.90@147
Fastest: 92 Talon AWD – 8.14 @ 171 MPH
www.maperformance.com
Mark Leasure is offline   Reply With Quote
Old 10-29-2012   #9
awdxtc
 

Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
Re: Parting out my 90 AWD

Pm sent
awdxtc is offline   Reply With Quote
Old 10-29-2012   #10
DSMINMN
Mitsus for days!
 
DSMINMN's Avatar
 

Join Date: Dec 2009
Location: Wadena, MN
Drives: '08 Chrysler 300C
Posts: 1,521
Send a message via MSN to DSMINMN Send a message via Yahoo to DSMINMN Send a message via Skype™ to DSMINMN
Re: Parting out my 90 AWD

Just curious here; what color are the TiAL BOV(s)? Thanks.
DSMINMN is offline   Reply With Quote
Old 10-30-2012   #11
awdxtc
 

Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
Re: Parting out my 90 AWD

Black
awdxtc is offline   Reply With Quote
Old 10-31-2012   #12
Mark Leasure
 
Mark Leasure's Avatar
 

Join Date: Aug 2006
Location: eagan
Posts: 898
Re: Parting out my 90 AWD

I'm looking forward to running next year with the dogbox, thanks for working out the deal with me!
__________________
Slowest: 2017 Corvette Z06 - Z07 Trim
Fast: EvoIX SE – Blouch 2.0xtr turbo – E85
Faster: Evo IX MR –PTE6266 – E85 –823WHP 9.90@147
Fastest: 92 Talon AWD – 8.14 @ 171 MPH
www.maperformance.com
Mark Leasure is offline   Reply With Quote
Old 10-31-2012   #13
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Parting out my 90 AWD

^Sweet!
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Old 10-31-2012   #14
goodhart
Transmission destroyer
 
goodhart's Avatar
 

Join Date: Feb 2007
Location: Cambridge
Drives: G37, 91 TSi
Posts: 7,150
Send a message via MSN to goodhart
Re: Parting out my 90 AWD

Mark you better update ur thread right meow!
__________________



Quote:
Originally Posted by scheides View Post
I swing from the nuts of cold hard data. Anything less is a guess.
goodhart is offline   Reply With Quote
Old 10-31-2012   #15
awdxtc
 

Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
Re: Parting out my 90 AWD

Quote:
Originally Posted by Mark Leasure View Post
I'm looking forward to running next year with the dogbox, thanks for working out the deal with me!
Anytime mark. let me know if you need any other parts. I have a killer transfer case as well.
awdxtc is offline   Reply With Quote
Old 10-31-2012   #16
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
Send a message via AIM to turbotalon1g
Re: Parting out my 90 AWD

lol, i think he tested that one and wasn't too happy with the results.

So sick, 165+mph here you go!
__________________
Aaron/brownman/big brown.
'91 Automagic.
'02 Z06
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 11-03-2012   #17
awdxtc
 

Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
Re: Parting out my 90 AWD

Transmission, axles, driveshaft and COP sold!!
awdxtc is offline   Reply With Quote
Old 11-03-2012   #18
Goat Blower
aka Goodbye
 
Goat Blower's Avatar
 
Asteroids Champion! Beach Squirter Champion!
Join Date: Oct 2003
Location: under the car
Drives: Taylor Made R15
Posts: 7,765
Re: Parting out my 90 AWD

Quote:
Originally Posted by Mark Leasure View Post
I'm looking forward to running next year with the dogbox, thanks for working out the deal with me!
Nice!
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie

Goat Blower is offline   Reply With Quote
Old 11-03-2012   #19
brently
 

Join Date: Apr 2005
Posts: 37
Re: Parting out my 90 AWD

Id be interested in some exterior parts if there in good condition.

-Hood, fenders, front/rear bumper covers

Thanks!
brently is offline   Reply With Quote
Old 11-03-2012   #20
awdxtc
 

Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
Re: Parting out my 90 AWD

The car is in amazing condition but im selling it as a rolling chassis.
awdxtc is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:52 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.