NON Start issue

[dsmDolney]

Okay so here is my problem. A couple weeks ago i came up to a stop sign and put inthe clutch and my car just died. And would not start back up would turn over and turn over but nothing. So i figured i ran out of gas. Went and got gas and still would not start. Figured i burnt my fuel pump up. So i put in a new fuel pump yesturday and still nothing. Then today i saw one of my spark plug wires were loose and put it back on nice and tight and it started right up then when i give it gas it would bog at first then would clear up later in the rpms. And now will not start it will just crank. I plugged in link on the laptop and it says my cps circut is bad so could that be why my car is not starting ?

[Goat Blower]

CPS circuit?

[dsmDolney]

This is what link says

[Fran05]

Crankwalk

[dsmDolney]

I hope not could it be tho

[mark4g63t]

Have you checked fuses? Is yours still 7 bolt? Checked that all the sensors are plugged in/clean?
I believe I have some extra crank and cam sensors lying around, i'll try to dig them up.

[jeremy1375]

A bad coolant temp sensor will also cause a no start.

[Goat Blower]

Coolant temp shouldn't matter much, it would just run really rich on startup. Check your crankshaft end play, hopefully it's just the sensor.

[dsmDolney]

Got a new sensor already does it need to be aligned with the cam sensor or anything or can i just swap the crank sensors

[carltalon]

Originally Posted by Goat Blower

Check your crankshaft end play, hopefully it's just the sensor.

I was thinking the same thing when I read it stalled when he pushed the clutch in. hopefully it hasn't gone walking and the sensor is just bad or the plug came loose. good luck.

[dsmDolney]

So im guessing it dont have to be aligned with the cam sensor correct

[carltalon]

Originally Posted by dsmDolney

So im guessing it dont have to be aligned with the cam sensor correct

The crank sensor just bolts in next to the crank under the timing cover there is no alighnment or adjustment,

[dsmDolney]

Okay thank you

[dsmDolney]

Well i think it walked it keeps poopin up that the cps is bad and i got the new sensor in. So i dont know what to do if someone maybe wants to come check it out before i tear it apart and give input thatll be cool but otherwise im done with it.

[jeremy1375]

Endplay check http://www.angelfire.com/pa4/awdcrankwalk/

Crankshaft endplay 0.0020 - 0.0071 per AllData for 96 AWD Turbo

Could be wiring issues also, so checking for crankwalk without tearing things apart might save you some time.

I should be available after Wednesday this week in the afternoons if you want help.

[dsmDolney]

Yea dont really feel like rippin it apart unless i really have to so id like to make sure it walked before that or atleast figure out its not other things help would be nice for sure

[jeremy1375]

I'll know for sure on Wednesday when my freetime will be so I'll pm you then.

[dsmDolney]

Sounds good thanks man

[dsmDolney]

So im like 100% positive it walked so now to decide to part out and get an evo or just rebuild it

[evotuner]

Evos arent bad

Sorry to hear about the misfortune you're having