MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Classifieds > Mitsu vehicle parts for sale

Reply
 
Thread Tools Display Modes
Old 10-25-2010   #1
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

I am now deciding to part out my car since no body is wanting to work out any type of trade or deal so its getting parted out.

The shell, tranny or long block has to be sold before I start to part it out. The shell has all brand new front control arms, ball joints, bushings and it also has a new convertible top as well. the shell is in at least a 9/10 condition and all of the rest of the parts have right around 1000 miles or less.

It has Boston component speakers and it also has a new top, convertible boot cover for when the top is down, new tires and brakes, and all of the other parts on the car only have a few thousand miles max but most under 1000 miles.

Engine:
6 bolt 2.3
Wiseco pistons
Eagle Rods
BS Eliminate
ACL Race Main and Rod Bearings

Intake:
4" intake w/ AEM dry technologies filter
2.5: SS Intercooler Piping Short Route
34x10x3.5 Intercooler SSAC short route
Venom SMIM
Turbosmart 50mm BOV only sold with piping if wanted.

Head:
SS Valves
Crower 414 cams
Dual valvesprings supertech
Titanium retainers supertech
Real A-1 Head Studs
Permatorque HG

Exhaust:
SS 3" 02 with 38mm Tial mini WG
3" SS Downpipe
3" SS Exhaust w/ Magnaflow

Clutch:
Fidanza flywheel
ACT 2900 PP
ACT 6 puck sprung disk
SS clutch line by tranny

Fuel:
1600cc injectors
AEM fuel rail
Aeromotive FPR
SS lines under hood from filter and to FPR

Tuning/Electronics:
DSMLink
MAF Translator with GM mas
Stock Coil w/ dynatek ignition system
AEM wideband

Tranny: Shep Stage 4 with welded center diff, evo 3 1st gear 500 miles and looks and drives brand new

Turbo: SCM6152rs Ball bearing with ss oil feed with adjustable oil feed rate, ss return, AN fittings and ss line bolting to all stock locations for coolant to turbo.

Corbeau seats with 2g sliders

Oil cooler with ss lines and fittings to bolt to 90 housing (90 housing available as well)

kyb gr2 struts with new eibach pro lowering springs all mounted

front and rear full adjustable camber kit

Ask for any other parts. PM me with any interests and prices can be worked out for groups of parts.
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 10-25-2010   #2
Boomdeeze
 
Boomdeeze's Avatar
 

Join Date: Apr 2010
Location: Independence, MN
Drives: 97 GSX
Posts: 421
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

How much for the complete oil cooler setup? Oil cooler, fittings, oil filter housing, ect. PM me with the price and some pics if your have any.
__________________
If you can't afford to buy an EVO, might as well beat an EVO
Boomdeeze is offline   Reply With Quote
Old 11-28-2010   #3
OMFGeofffff
 
OMFGeofffff's Avatar
 

Join Date: Nov 2008
Location: Burnsville
Drives: '90 Talon Tsi AWD
Posts: 145
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

Are some of these still available?

downpipe
flywheel
ss clutch line
aem fuel rail
OMFGeofffff is offline   Reply With Quote
Old 11-28-2010   #4
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

They are if someone buys the motor, trans, or shell first.
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 11-29-2010   #5
s1ngletracker
 
s1ngletracker's Avatar
 

Join Date: Oct 2005
Location: The land of the next-gen HMMWV
Drives: A BMW
Posts: 1,875
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

PM me a price on the head?
__________________
Style's automotive engineer

Sponsored by DB Performance (dbptuning.com)

A dsm, a bimmer, a DORGE CUMMINZ, and a non running DSM race car... for now.
s1ngletracker is offline   Reply With Quote
Old 11-29-2010   #6
GsXtUrBo98
 
GsXtUrBo98's Avatar
 

Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
Send a message via AIM to GsXtUrBo98
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

I'm pretty sure he's only selling it as a long block... could be wrong though
__________________
98 GSX (built)
03 BBY EVO dd

GSX 463awhp 363awtq on DB!
GsXtUrBo98 is offline   Reply With Quote
Old 11-29-2010   #7
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

Ok lets just close this thread since people can't see that I'm only going to part it out if the motor,tranny or shell sell first. Thanks.
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 01-24-2011   #8
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

Ok parting it all out. Shell stays as a shell so no stripping it sown but all performance parts and all can go. Here are some of the parts

I am now deciding to part out my car since no body is wanting to work out any type of trade or deal so its getting parted out.

The shell has all brand new front control arms, ball joints, bushings and it also has a new convertible top as well. the shell is in at least a 9/10 condition and all of the rest of the parts have right around 1000 miles or less.

It has Boston component speakers and it also has a new top, convertible boot cover for when the top is down, new tires and brakes, and all of the other parts on the car only have a few thousand miles max but most under 1000 miles.

Engine:
6 bolt 2.3
Wiseco pistons
Eagle Rods
BS Eliminate
ACL Race Main and Rod Bearings

Intake:
4" intake w/ AEM dry technologies filter
2.5: SS Intercooler Piping Short Route
34x10x3.5 Intercooler SSAC short route
Venom SMIM
Turbosmart 50mm BOV only sold with piping if wanted.

Head:
SS Valves
Crower 414 cams
Dual valvesprings supertech
Titanium retainers supertech
Real A-1 Head Studs
Permatorque HG

Exhaust:
SS 3" 02 with 38mm Tial mini WG
3" SS Downpipe
3" SS Exhaust w/ Magnaflow

Clutch:
Fidanza flywheel
ACT 2900 PP
ACT 6 puck sprung disk
SS clutch line by tranny

Fuel:
1600cc injectors
AEM fuel rail
Aeromotive FPR
SS lines under hood from filter and to FPR

Tuning/Electronics:
DSMLink
MAF Translator with GM mas
Stock Coil w/ dynatek ignition system
AEM wideband

Tranny: Shep Stage 4 with welded center diff, evo 3 1st gear 500 miles and looks and drives brand new

Turbo: SCM6152rs Ball bearing with ss oil feed with adjustable oil feed rate, ss return, AN fittings and ss line bolting to all stock locations for coolant to turbo.

Corbeau seats with 2g sliders

Oil cooler with ss lines and fittings to bolt to 90 housing (90 housing available as well)

kyb gr2 struts with new eibach pro lowering springs all mounted

front and rear full adjustable camber kit

Ask for any other parts. PM me with any interests and prices can be worked out for groups of parts.
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 01-25-2011   #9
my2cent
 
my2cent's Avatar
 

Join Date: Sep 2010
Location: Metro
Drives: 99 gsx
Posts: 142
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

does the intake has a bov return tube? Can u send me pictures of the exhuast?
my2cent is offline   Reply With Quote
Old 01-25-2011   #10
Brandito93
 
Brandito93's Avatar
 

Join Date: Feb 2010
Location: Alexandria, MN
Drives: 1989 Nissan 240SX RB20
Posts: 231
Send a message via Skype™ to Brandito93
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

How much for the struts and springs. And they'd work for a 98 GSX right? And how much for the seats?

Last edited by Brandito93; 01-25-2011 at 08:44 PM..
Brandito93 is offline   Reply With Quote
Old 01-28-2011   #11
Project2G
Semper Fidelis
 
Project2G's Avatar
 

Join Date: Apr 2007
Location: Denver, CO
Drives: 1997 Eclipse GST
Posts: 570
Send a message via AIM to Project2G
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

How much for this shipped to 80120?
2.5: SS Intercooler Piping Short Route
34x10x3.5 Intercooler SSAC short route

Also might be interested in the tial 38mm wastegate if willing to sell w/o o2
__________________
-SCM6152E, Ecmlink V3, 1200cc, etc.
Project2G is offline   Reply With Quote
Old 01-29-2011   #12
Hollywood
 

Join Date: Aug 2009
Location: Brooklyn Park, MN
Drives: 98 Eclipse GST/ 90 Laser RS
Posts: 41
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

would of been nice if you put prices on everything.
Hollywood is offline   Reply With Quote
Old 01-29-2011   #13
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

well pm me. Most people are buying multiple things so I give a better price so pm me with what ya want.
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 02-06-2011   #14
Brandito93
 
Brandito93's Avatar
 

Join Date: Feb 2010
Location: Alexandria, MN
Drives: 1989 Nissan 240SX RB20
Posts: 231
Send a message via Skype™ to Brandito93
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

How much for the 3" SS Downpipe and the 3" SS Exhaust w/ Magnaflow. Seperate prices if you could. I also suppose I should ask if you still have them?
Brandito93 is offline   Reply With Quote
Old 02-06-2011   #15
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

it is all custom with my 02 housing and is not stock bolt up. all has to go together with 02 if you are interested.
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 02-06-2011   #16
1999Gst
 

Join Date: Jan 2011
Location: St.Paul
Drives: 1999 Eclipse,
Posts: 304
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

How much for the complete oil cooler setup? Oil cooler, fittings, oil filter housing, ect.?? again if not sold
1999Gst is offline   Reply With Quote
Old 03-05-2011   #17
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

Have these left PM me if interested in any of them.

strut tower braces/bar front and rear

6 bolt 2.3 stroker
Wiseco pistons
Eagle Rods
BS Eliminate
ACL Race Main and Rod Bearings

4" intake w/ AEM dry technologies filter

2.5: SS Intercooler Piping Short Route

34x10x3.5 Intercooler SSAC short route

Venom SMIM

SS Valves

Bronze guides new

OEM new from Mitsu valve locks

Low mile revised 3g lifters

Stock evo lifters

Crower 414 cams

3" SS Downpipe v band to 02 housing

3" SS Exhaust w/ Magnaflow

Fidanza flywheel

ACT 2900 PP

ACT 6 puck sprung disk

SS clutch line by tranny

SS lines under hood from filter and to FPR

MAF Translator with GM mas

Stock Coil

Turbo: SCM6152rs Ball bearing with ss oil feed with adjustable oil feed rate, ss return, AN fittings and ss line bolting to all stock locations for coolant to turbo.

Oil cooler with ss lines and fittings to bolt to 90 housing (90 housing available as well)

kyb gr2 struts with new eibach pro lowering springs all mounted

front and rear full adjustable camber kit
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 03-05-2011   #18
Owned
Banned
 

Join Date: Feb 2011
Location: Minneapolis
Drives: 2g
Posts: 38
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

no suspension setup for a 2g FWD in all these parts you got?
Owned is offline   Reply With Quote
Old 03-05-2011   #19
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

nope
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 03-08-2011   #20
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: Partout 97 Eclipse AWD Spyder Stroker 579hp Partout

Have these left PM me if interested in any of them.

strut tower braces/bar front and rear

6 bolt 2.3 stroker
Wiseco pistons
Eagle Rods
BS Eliminate
ACL Race Main and Rod Bearings

2.5: SS Intercooler Piping Short Route

34x10x3.5 Intercooler SSAC short route

Venom SMIM

SS Valves

Bronze guides new

OEM new from Mitsu valve locks

Low mile revised 3g lifters

Stock evo lifters

Crower 414 cams

3" SS Downpipe v band to 02 housing

3" SS Exhaust w/ Magnaflow

Fidanza flywheel

ACT 2900 PP

ACT 6 puck sprung disk

SS clutch line by tranny

MAF Translator with GM mas

Stock Coil

kyb gr2 struts with new eibach pro lowering springs all mounted

front and rear full adjustable camber kit
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:42 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.