88 Merkur XR4Ti for your DSM Parts!!!

[Evo Kevin]

ASKING: $1000 Or make me an offer/ Willing to trade for 1G FWD DSM Parts!
Just stuck $130 into fixing the master cyl. & Temp gauge and Im asking less!!!

Im listing my 88 Mekur XR4Ti
2.3L Turbo Ford engine & 5speed manual
Blue Extior/grey cloth interior
122,XXX miles
Original Engine & Trans. Run & shift good
Obviously a 20yr MN car will have some rust, but still looks good
NEW:
Timing belt
Water Pump
Both Alt. & Power steering belts replaced
Thermostat
New turbo oil feed line
Coil, plugs, wires, cap, and rotor
Runs like a champ after all of this stuff
Brand New Mich. Winter tires on all 4 wheels
Aftermarket Boost Controller (not even used yet)
Rapido FMIC
Turbonetics 2.5" outlet elbow
3" Downpipe

BAD:
Cracked windshield
Half the key is broken off in the Ign. Still works like a key & starts fine
Dent in drivers door
Temp gauge sticks very low, again very common on these cars. I usually run the fan all the time anyways to keep the heat of the engine from the turbo.

Thats all I can think of at this time. Feel to contact me via email at DC2Kevin@hotmail.com or if you need too set-up a time to look/test the car I can be reached @ 612-483-5227 or just PM me.





Thanks for looking,

-Kevin

[turbotalon1g]

I love these cars.

[Evo Kevin]

Originally Posted by turbotalon1g

I love these cars.

Yea, they are very fun, but Im a proud new owner of 91 Tsi and I would like to focus on one project.

[1QUICK4]

What kind of 1G FWD parts you looking for?

I have a ton!

[Evo Kevin]

Originally Posted by 1QUICK4

What kind of 1G FWD parts you looking for?

I have a ton!

My car is completely stock, so 3" DP, exhaust, FMIC, intake, 16G 20G turbo, manifold (in. or ex.) ect.

Really Im open to a lot of ideas, dont be affriad to offer.

[Mwolf83]

I saw one of these bad boys up in Brainerd Raceway running low 12's. Thing was gorgeous.

[Kevin 1G Drummer]

Good god, that car is f*cking hideous! Whoever designed that thing should be slapped repetedly! No offense to you or your car.

[Evo Kevin]

Originally Posted by Kevin_1G_Drummer

Good god, that car is f*cking hideous! Whoever designed that thing should be slapped repetedly! No offense to you or your car.

No offense taken...If I remember correctly the person who designed the Escort/XR4Ti used the 928 Porsche as inspiration, if thats easy to believe.

[123abc]

With a set of wheels, lowered, I think it would clean up decent.

[Evo Kevin]

Not asking much...just want some parts for the new toy OR just make me a decent offer.

I will be working on it this weekend to wrap up some loose ends like bleeding the brakes, putting in a new temp. sensor ect.

[Evo Kevin]

Replaced the brake master cylinder & temp. sensor this past week. Price reduced even w/ more time & money spent!!!!

Looking for a good home...

[Evo Kevin]

Will trade for any of these items:
Evo 3 16G
560 or 650cc Inj.
FWD Exhaust
S-AFC 2
MAF trans.
3" GM MAF
FMIC

Hit me up w/ offers, I need to free up some space in the garage soon!

-Kevin