MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > Project Talk

Reply
 
Thread Tools Display Modes
Old 06-04-2015   #81
goodhart
Transmission destroyer
 
goodhart's Avatar
 

Join Date: Feb 2007
Location: Cambridge
Drives: G37, 91 TSi
Posts: 7,150
Send a message via MSN to goodhart
Re: Brad's New Bike - '12 ZX10R

Nope! Never will! Perk of the job
__________________



Quote:
Originally Posted by scheides View Post
I swing from the nuts of cold hard data. Anything less is a guess.
goodhart is offline   Reply With Quote
Old 09-25-2015   #82
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Brad's New Bike - '12 ZX10R

Haven't done much as far as mods this summer as it's pretty much how I want it other than nitrous and I don't think I'll put nitrous on it. Too much of a headache.


I did lower the front and back a little bit more this year though. Gives it a solid stance with my stretched tires


Earlier this month at proving grounds was the best it's gone. Bike weighed 395lbs which I was pretty pumped about. I ended up weighing 225 suited which I wasn't so pumped about lol. If I could lose 20 lbs over the winter I could get this thing into the 8s on pump gas then keep getting better launches I think I could be there pretty consistently.






Picked up a cruiser this week though so probably put some money into making that my own. Maybe make a thread on that too if I get bored. Kind of hope I could run 11.99 on this thing lol
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Old 09-28-2015   #83
evotuner
 
evotuner's Avatar
 

Join Date: Apr 2008
Location: Mankato
Drives: 2004 Evo 8
Posts: 1,152
Re: Brad's New Bike - '12 ZX10R

Those time are so consistent, awesome work Brad.
__________________
2010 Nissan GTR - E85 #RonnieTuned

2004 AS Evo VIII - MAP 2.3/FP Green E85 480/450 @30psi #RonnieTuned

2006 WW IX RS - Stock Motor/Turbo/E85 388/404 #RonnieTuned

2006 WW IX RS - 20K Miles - SOLD

2006 WW IX RS 396/404 - SOLD
evotuner is offline   Reply With Quote
Old 09-28-2015   #84
tehehodi
Braaaaaaaap!
 
tehehodi's Avatar
 

Join Date: Dec 2008
Location: Fridley
Drives: '09 Silveraydo
Posts: 2,028
Send a message via AIM to tehehodi
Re: Brad's New Bike - '12 ZX10R

Seriously, change the exhaust on the cruiser. That thing is a cannon and looks goofy and out of place with the rest of the bike.

Or just replace the can with this:


Last edited by tehehodi; 09-28-2015 at 10:17 AM..
tehehodi is offline   Reply With Quote
Old 09-28-2015   #85
A//// Guy
 
A//// Guy's Avatar
 
Bloody Seal Bounce Champion!
Join Date: Oct 2003
Location: South Burbs
Drives: Slowly
Posts: 9,870
Re: Brad's New Bike - '12 ZX10R

Always loved warriors, nice! Only gripe about those is the stupid exhaust pipe, no idea what they were thinking.
A//// Guy is offline   Reply With Quote
Old 09-28-2015   #86
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Brad's New Bike - '12 ZX10R

Quote:
Originally Posted by evotuner View Post
Those time are so consistent, awesome work Brad.
Thanks sir! I did put an auto shift on it too, so I'd shift at the same time everytime as long as I didn't spin. That probably helped be pretty consistent too lol

Quote:
Originally Posted by tehehodi View Post
Seriously, change the exhaust on the cruiser. That thing is a cannon and looks goofy and out of place with the rest of the bike.

Or just replace the can with this:

Quote:
Originally Posted by A//// Guy View Post
Always loved warriors, nice! Only gripe about those is the stupid exhaust pipe, no idea what they were thinking.


The bike had some Vance and Hines Big Radius on it for a little while before he took them off. He had them coated black and I remember when I rode it with the pipes it sounded good and remember them looking really nice when they were blacked out.

No money now but probably see if I can score a good deal on something this winter so got time to decide. I'll have to make sure they don't scrape either, this thing has been getting the pegs scrapped pretty hard this past weekend lol
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Old 09-28-2015   #87
93gtpeater
 

Join Date: Apr 2008
Location: stillwater
Drives: cbr 1000rr repsol
Posts: 1,451
Re: Brad's New Bike - '12 ZX10R

Does the warrior wheelie?
93gtpeater is offline   Reply With Quote
Old 04-20-2016   #88
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Brad's New Bike - '12 ZX10R

Ended up going to a 520 drag chain and currently have a -1/+7 sprocket on the bike. I also have a +6 sprocket in case the +7 is too much gearing. Went with an aluminum rear sprocket and got some aluminum sprocket nuts to try and save a little weight. Didn't save a ton of weight but saved a bit.



Before I changed the sprockets a busa wanted to race the bike so a quick run was done against that bike.

http://www.youtube.com/watch?v=HhxFHQGk6-c&hd=1

Since I am pretty desperate for 8s on pump gas and I didn't save that much weight with the 520 setup, I plan on running with no rear caliper at the track this weekend. Couldn't believe how much that stuff weighed. Finger crossed between the new drag chain and sprocket combo and rider weight loss mod of around 10-15lbs, I can crack off that 8 on pump gas


Also had a local college photography student come over and take some pictures of the bike while I worked on it and took a cool one when I was done> Photo cred to Logan Baxter Photography
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Old 04-20-2016   #89
niterydr
back in the saddle again
 
niterydr's Avatar
 
24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion!
Tournaments Won: 5

Join Date: Oct 2003
Location: Elkhart Texas
Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo
Posts: 6,411
Send a message via AIM to niterydr
Re: Brad's New Bike - '12 ZX10R

Love it, our bikes couldn't be any more different; but we are both racing Kawi's baby.
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
niterydr is offline   Reply With Quote
Old 04-20-2016   #90
tehehodi
Braaaaaaaap!
 
tehehodi's Avatar
 

Join Date: Dec 2008
Location: Fridley
Drives: '09 Silveraydo
Posts: 2,028
Send a message via AIM to tehehodi
Re: Brad's New Bike - '12 ZX10R

LOL damn dude! Change out all the bolts for aluminum and get CF body work. Remove one caliper and rotor up front!

Awesome on the rider mod, just don't forget to poop in the morning and take ex lax the night before. Can't wait to see what this thing runs. I might be able to come out Sunday and snap photos if I can hitch a ride or something.
tehehodi is offline   Reply With Quote
Old 04-20-2016   #91
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
Send a message via AIM to turbotalon1g
Re: Brad's New Bike - '12 ZX10R

Damn you smoked that fool on that fat bike.
Stay safe out there.
__________________
Aaron/brownman/big brown.
'91 Automagic.
'02 Z06
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 04-20-2016   #92
93gtpeater
 

Join Date: Apr 2008
Location: stillwater
Drives: cbr 1000rr repsol
Posts: 1,451
Re: Brad's New Bike - '12 ZX10R

That fat bike is fat. Weigh almost hundred pounds more then that light liter bike.
93gtpeater is offline   Reply With Quote
Old 04-21-2016   #93
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Brad's New Bike - '12 ZX10R

Quote:
Originally Posted by niterydr View Post
Love it, our bikes couldn't be any more different; but we are both racing Kawi's baby.
Thank ya sir! Good luck racing your bike this year!

Quote:
Originally Posted by tehehodi View Post
LOL damn dude! Change out all the bolts for aluminum and get CF body work. Remove one caliper and rotor up front!

Awesome on the rider mod, just don't forget to poop in the morning and take ex lax the night before. Can't wait to see what this thing runs. I might be able to come out Sunday and snap photos if I can hitch a ride or something.
Haha I think taking a morning shit would lose as much weight as changing the bolts to aluminum. I was half tempted to change the fairing bolts to aluminum though just to have black bolts instead of silver. Ricer mods wuddup.

I'd say come with but I can't imagine the truck being very comfy for 3 hours with 3 people in it. We could make it work if you wanted to come tho

Quote:
Originally Posted by turbotalon1g View Post
Damn you smoked that fool on that fat bike.
Stay safe out there.
Quote:
Originally Posted by 93gtpeater View Post
That fat bike is fat. Weigh almost hundred pounds more then that light liter bike.
Lol it was all in good fun to make sure our bikes were running good before the track this weekend. I of course didn't post the video where I got rocked because I couldn't find 2nd gear 2 times and when I spun hard. That fat bike rocked me then
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Old 10-10-2016   #94
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Brad's New Bike - '12 ZX10R

Desperate for those 8s I went and got some World Wide ceramic wheel bearings lol



Went back to the track on October 1st and only got 4 passes in as the track was just packed. Went 9.0 twice then 9.1 and a 9.2 on 2 wheelies. Brought the dog and he loved the track as a few other buddies had dogs and it was like a puppy play date at the track lol.


Kind of bummed I didn't get that 8 I decided to go back again on the 8th for one last shot at it, and I was pumped I did. First pass off the trailer it went 8.9 and knew it was going to be a good day. Ended up running 8.8's 5 times and went 8.9 4 times. Bike was fuckin moving this weekend in the cooler air.



Now I kind of want to try and set the bike up for some standing mile stuff and see if I can hit that 200mph mark.
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Old 10-10-2016   #95
tehehodi
Braaaaaaaap!
 
tehehodi's Avatar
 

Join Date: Dec 2008
Location: Fridley
Drives: '09 Silveraydo
Posts: 2,028
Send a message via AIM to tehehodi
Re: Brad's New Bike - '12 ZX10R

Woo woo! Awesome job man! Glad you got that 8. You think the bearings helped or just the cooler air?
tehehodi is offline   Reply With Quote
Old 01-04-2017   #96
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Brad's New Bike - '12 ZX10R

Finally got around to putting together a quick video of me and paul racing against our buddy with a turbo busa. Pauls on the blue bike with a big bore motor and we were pretty damn close, but he edges me out. The poor turbo busa was just fighting traction issues as it was pretty cold out and the bike needs help with the setup.


http://www.youtube.com/watch?v=Az5vZsACa_Q&hd=1

Starting to work on this thing again! Kinda miss tinkering out in the garage.

Going to pull the motor and send off the head off to get some head work done. Plan is to deck the head, port work, valve job, degree'd cams and thinner headgasket.The guy who is doing my head said he did a similar build for one of his customers and he made 209 on race gas and 199 on pump gas. I'd be extremely pumped to get 200 on race gas as that'd be a huge increase over what it makes now.



Going to try losing about 10-15ish more lbs between me and riding gear this winter. Hopefully with being lighter and that head work and race gas the bike can dip into the 8.6's so I can say its a mid 8 second bike lol.


Then after doing a track day or 2 in the spring I'm going to put it back to stock wheel base, do a couple aero modifications and see if this thing can do 200mph in a mile and a half out in Maine in September. Should be a fun year!
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Old 01-04-2017   #97
tehehodi
Braaaaaaaap!
 
tehehodi's Avatar
 

Join Date: Dec 2008
Location: Fridley
Drives: '09 Silveraydo
Posts: 2,028
Send a message via AIM to tehehodi
Re: Brad's New Bike - '12 ZX10R

Weren't you pondering the idea of using race bodywork for more aero?
tehehodi is offline   Reply With Quote
Old 01-04-2017   #98
93gtpeater
 

Join Date: Apr 2008
Location: stillwater
Drives: cbr 1000rr repsol
Posts: 1,451
Re: Brad's New Bike - '12 ZX10R

Your bike will fly with the head work. Woot woot. Can't wait for next year and some swb roll. Hopefully it's will be a better race when I can use 1st gear
93gtpeater is offline   Reply With Quote
Old 01-04-2017   #99
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
Send a message via AIM to turbotalon1g
Re: Brad's New Bike - '12 ZX10R

This sounds very scary to me.
__________________
Aaron/brownman/big brown.
'91 Automagic.
'02 Z06
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 01-04-2017   #100
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Brad's New Bike - '12 ZX10R

Quote:
Originally Posted by tehehodi View Post
Weren't you pondering the idea of using race bodywork for more aero?
Yea, but can't spend money like I used to and head work seemed like the power would be there all the time for street and drag racing duty vs body work I'd really only use the one time. Still hope to get some sort of belly pan if it'd fit with my exhaust to help air move under the bike better and a big ol' ugly busa land speed racing front fender to help move air over the front tire better. They look ugly with that front fender, but guess its good for around 5mph

Quote:
Originally Posted by 93gtpeater View Post
Your bike will fly with the head work. Woot woot. Can't wait for next year and some swb roll. Hopefully it's will be a better race when I can use 1st gear
Fingers crossed. Hopefully get some more good races in next year!! I don't wanna be the slow guy lol

Quote:
Originally Posted by turbotalon1g View Post
This sounds very scary to me.
Hopefully it isn't too scary. I figure I want to do it before we hopefully have kids as I'll have no time for a long while after I assume and by the time I will have time my reaction/riding skills will probably be shitty lol
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:48 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.