View Single Post
Old 05-07-2018   #21
CarPsyco84
 
CarPsyco84's Avatar
 

Join Date: Jan 2005
Location: Coon Rapids
Drives: 07' Z06, 16' Beta 300RR
Posts: 804
Re: My ultimate streetcar

Quote:
Originally Posted by turbotalon1g View Post
I'm going to use a 2 can setup, Calan catch can is the best on the market hands down. I have his original can and I'll have another here soon.

he also goes by JCSautomation, but if you search calan catch can on tuners you will find all the info you need.

I plan on doing the same setup as you, 2 off the VC and one off the block. The single line will be using vacuum off of the intake and the 2 lines off the VC will have vacuum from the intake (pre turbo).
Ahh, so you intend to pull the cruising vacuum to the block vent then? I was thinking the 1 VC vent to the intake mani (vacuum), probably where the PCV is from the factory. Then the other VC vent and block to the other can that vents/draws to the intake line.

Thanks for the tip about the Calan cans, I will have to look into them, cause I like how mishumoto was the seperation, and having a bronze filter on the outlet, but there isn't much for fittitings or even decent fitting size on them (all 3/8" NPT).
__________________
-When in doubt, Moar RPM.
CarPsyco84 is offline   Reply With Quote