Found some results for the S362:
http://forums.evolutionm.net/evo-dyn...o-results.html
Car info (EVO):
Motor-
2.0 LR 9.1.0 CR
Howard Ultimate Duty I-beams 156mm Rods
Wiseco HD 9.1.0 Pistons .20 over
ACL Bearing
Sparktech non-CDI Ignition
GSC S2 Cams
GSC Behive Springs
GSC Ti Retainers
GSC Valve Seats
Supertech Valves black nitrate coated
Supertech Valve Guides
Torque Solutions Motor Mount Kit
APR Front Motor Mount
BEP S362 T3 Turbo .70 A/R w/CompR Billet wheels
Turbo Trix Manifold
Custom DP
Custom Test Pipe
BR SD 3" Catback
Fuel System-
Fuel Lab FPR kit
FIC 1450cc
AEM Meth Injection "Direct Port" w/Failsafe
Cooling Mist CM5 Knozzels x4
BR Double Pumper
Trans-
Bushwacker Trans "Evo IX 5 speed Trans w/Evo VIII 4th"
Exedy Twin HD
MAP Clutch Fork Stop
STM 1 piece clutch Line
B&M Short Shifter
Blox Knob
Redlinegoods Shift Boot "Custom made for MR Console"
Suspension-
Standard Suspension R3 Coilovers
Whiteline Roll center correction kit
Boost was off on the 35.25 run I maxed the 50psi Absolute sensor which maxes at 35 when we did another pull it was 38.X psi and the sensor is off by 1psi reading higher so we got it to 41 psi.
The 608 and 553 are 3rd gear pulls and the 616 is a 4th gear pull.