|
Re: Project Lex
Played with the filtering a bit. I have the global filter time now set to 5uS. That basically means, any pulse that is less than 5uS in length gets filtered out. Anything longer than that is considered good and is used. So basically goes off the assumption that good signals are long, and noise is short.
I then set the rejection percentage to 70%. That means that it predicts when it should see the next pulse. So anything that happens within the first 70% of that time gets ignored. For example say it predicts it'll see the next pulse in 100ms, it'll wait for 70ms until it even starts looking for it again. So any noise that is occurring in the first 70ms is completely ignored.
Car is running like a champ!!! Goint to hookup the ignition again and make sure she's running good still. If so, I may start talking to Shane about getting a quick base tune before the turboing begins!!
|