MitsuStyle - View Single Post

simulatedwood · 03-26-2010

Murlo,

Your setup should work just fine, Have you seen some of the setups evodave has been running (I believe 10.5 with 295 width) ? I think you are pretty safe on that setup. As far as Camber goes, Jeff the alingment guy was able to eek out 2.5 degrees of camber on the fronts on my setup just flipping the blots and applying pressure on the lower control arm with a bottle jack when tightening the bolts

. As for the rest of the suspension, biggest bang for you buck will be a rear swaybar. I picked up a perrin from MAP for $180. Between tires, agressive alignment, and rear sway. You will be on rails.

03-26-2010	#297
simulatedwood Join Date: Sep 2009 Location: Hastings, MN Drives: 08 Evolution X Posts: 482	Re: Dave's Evo X Build Murlo, Your setup should work just fine, Have you seen some of the setups evodave has been running (I believe 10.5 with 295 width) ? I think you are pretty safe on that setup. As far as Camber goes, Jeff the alingment guy was able to eek out 2.5 degrees of camber on the fronts on my setup just flipping the blots and applying pressure on the lower control arm with a bottle jack when tightening the bolts . As for the rest of the suspension, biggest bang for you buck will be a rear swaybar. I picked up a perrin from MAP for $180. Between tires, agressive alignment, and rear sway. You will be on rails.