Thread
:
Project Lex
View Single Post
10-18-2013
#
922
Halon
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Re: Project Lex
Some more pics. I think I'm done with the passenger and driver side wires. One thing I may not have mentioned is I've removed my ABS, so the ABS fuse box and associated wiring is removed from the driver side. So the wire you see that I ran in that wheel well is just the brake reservoir sensor.
Passenger Side:
here you can see I extended the alternator cable about 8" or so and snaked it (and clamped it) around the bottom side there
the next few pics you can see I just used black zip ties to secure the loom. I think I'm going to go back and add a 2nd zip tie to every spot just for redundancy in case one were to break. I also had to extend that wire that runs back into the engine bay near the firewall, must be for A/C or something.
How it looks in the engine bay now.
Driver Side:
Had to extend the brake reservoir wire (forgot how much) Probably could have extended it a little more, but I think it's probably fine.
__________________
B-Man -
FlexFuel Mafia
1991 TSi AWD
E85
- BEP S362, DSMLink V2, Built 2.0L
Idle Vid
628hp Graph
541hp Vid
10.93@137 Vid
1992 SC300
E85
- BW 84-75, Vlad Infinity, NA-T, 6spd
Idle Vid
709hp Graph
709hp Vid
11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0
Top Speed Test
Halon
View Public Profile
Send a private message to Halon
Find More Posts by Halon