Finally got a chance to pull my car in the garage to tinker with it a bit.
Got dsmlink installed and pulled out the safc that was in there.
Next pulled out the charcoal canister, egr and most of the "extra" stuff on the fire wall.
Then realized I needed to make an egr block off plate, so made one out of some scrap metal around the garage.
The start of it
The end before sanding the backside smooth to get a good seal
Ended up using the two bolts that mounted the charcoal canister to the frame to bolt down the egr block off place. Yay for free stuff
Now just need to find a good deal on injectors and a wheel/slick setup.