MitsuStyle - View Single Post

Pushit2.0 · 08-11-2005

I just thought we should talk about this a little more. So what, if any, tested information do we have on this. I have 2 sets of Crower rods for my car, normal and 6mm longer rods. I was going to come up with a way to test the two sets, keeping as much the same as possible. With the longer rod you need to get custom pistons that moves the pin up in the piston, giving a better rod ratio and more dwell time at TDC. What do we think on this?

~John
I am running a 2.0 still also

08-11-2005	#1
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Long rod motors? I just thought we should talk about this a little more. So what, if any, tested information do we have on this. I have 2 sets of Crower rods for my car, normal and 6mm longer rods. I was going to come up with a way to test the two sets, keeping as much the same as possible. With the longer rod you need to get custom pistons that moves the pin up in the piston, giving a better rod ratio and more dwell time at TDC. What do we think on this? ~John I am running a 2.0 still also __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.