MitsuStyle - View Single Post

john · 12-14-2003

No, it is not that hard to do. Remove teh screws on the outside of the pannel, pop the panel fasteners off, unclip the electrical connector on the back side, remove the rods from the handle, unbolt the door handle, pull it out, remove the clip that holds the lock on it, and put everything back together using the new handle.

BTW, this should be in basic tech.

12-14-2003	#3
john Business as usual Join Date: Oct 2003 Location: Isanti, MN Drives: Dodge Viper and Honda Insight Posts: 2,206	No, it is not that hard to do. Remove teh screws on the outside of the pannel, pop the panel fasteners off, unclip the electrical connector on the back side, remove the rods from the handle, unbolt the door handle, pull it out, remove the clip that holds the lock on it, and put everything back together using the new handle. BTW, this should be in basic tech. __________________ 97 Viper GTS 03 Mercedes CLK500 rollin on dubs...