MitsuStyle - View Single Post - Getting serious about a FMIC, need options...

howslowcanyougo · 05-02-2005

http://www.extremeintercoolers.com/2g_7_kits.htm

Thanks for the interest in our 2g dsm kit , Our will be as close to a bolt on affair as any FMIC kit can be for the 2g. It comes with full pictorial instructions , and will not
require any welding or metal cutting. You will have to remove the power steering
cooler , and there is some splash guard , and bumper cover cutting , and thats
it !! The hardest part of the install is getting the bumper off in the first
place. I will highlight some thing that set our kit apart from the rest:

1. Our J pipe clears BOTH stock fans
2. Foglights stay on 97 up
3. Short route piping , without cutting the core support
4. 2.5 piping all the way to T/B Elbow , replaces all piping
5. Our 25" wide core fill the whole grill with core ( killer loook )
6. Modular Design , 1 pipe upgrades you to t3/t4
7. No bumper cutting with 7" kit
8. Full Pictorial Instuctions and freidly Service !!

The bottom line , is that our kit will be the easiest to install , you will have
to cut some plastic , but no metal ,

Thanks
JR Perrott
ETS 360 263 3748 call us any time

Sounds like a plan!

05-02-2005	#2
howslowcanyougo Older than Dirt... Join Date: Feb 2004 Location: Inver Grove Drives: IX EVO MR/SE Posts: 483	Re: Getting serious about a FMIC, need options... http://www.extremeintercoolers.com/2g_7_kits.htm Thanks for the interest in our 2g dsm kit , Our will be as close to a bolt on affair as any FMIC kit can be for the 2g. It comes with full pictorial instructions , and will not require any welding or metal cutting. You will have to remove the power steering cooler , and there is some splash guard , and bumper cover cutting , and thats it !! The hardest part of the install is getting the bumper off in the first place. I will highlight some thing that set our kit apart from the rest: 1. Our J pipe clears BOTH stock fans 2. Foglights stay on 97 up 3. Short route piping , without cutting the core support 4. 2.5 piping all the way to T/B Elbow , replaces all piping 5. Our 25" wide core fill the whole grill with core ( killer loook ) 6. Modular Design , 1 pipe upgrades you to t3/t4 7. No bumper cutting with 7" kit 8. Full Pictorial Instuctions and freidly Service !! The bottom line , is that our kit will be the easiest to install , you will have to cut some plastic , but no metal , Thanks JR Perrott ETS 360 263 3748 call us any time Sounds like a plan! __________________ Let the madness begin...