MitsuStyle - View Single Post

niterydr · 04-25-2005

Most vehicles are torqued to 60-80-90, sequentially, without a torque plate (aka stock motor with headstuds) and using moly lube (dry holes, dry studs, moly on the tops, washers, nuts).
Drive for 100 miles then retorque.
Torque plated/built motors vary with torque spec, usually 100ft. lbs.

04-25-2005	#5
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: ARP Head bolt install help needed. Most vehicles are torqued to 60-80-90, sequentially, without a torque plate (aka stock motor with headstuds) and using moly lube (dry holes, dry studs, moly on the tops, washers, nuts). Drive for 100 miles then retorque. Torque plated/built motors vary with torque spec, usually 100ft. lbs. __________________ My street car runs low 11's and my race car's personal best is a mid 11....