MitsuStyle - View Single Post

howslowcanyougo · 04-23-2005

I just went and checked all the Vac lines they looked ok? Then I took a hammer and tapped on the JoeP MBC, and turned it all the way in and back out, wrapped it again, and tested it this time as having only about 10 lbs!

So now it looks like it's working, like a ball got stuck and loosened when I wrapped it with hammer or?

This maybe a stupid question, but should I squirt some WD40 down in the MBC , or just replace it, as I sure don't want to blow a HG or worse, and if this happens again, I might not be so lucky?

Many Thanks Again.....!

Howie

04-23-2005	#3
howslowcanyougo Older than Dirt... Join Date: Feb 2004 Location: Inver Grove Drives: IX EVO MR/SE Posts: 483	Re: JoeP MBC won't control boost anymore? I just went and checked all the Vac lines they looked ok? Then I took a hammer and tapped on the JoeP MBC, and turned it all the way in and back out, wrapped it again, and tested it this time as having only about 10 lbs! So now it looks like it's working, like a ball got stuck and loosened when I wrapped it with hammer or? This maybe a stupid question, but should I squirt some WD40 down in the MBC , or just replace it, as I sure don't want to blow a HG or worse, and if this happens again, I might not be so lucky? Many Thanks Again.....! Howie __________________ Let the madness begin...