View Single Post
Old 04-20-2005   #15
niterydr
back in the saddle again
 
niterydr's Avatar
 
24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion!
Tournaments Won: 5

Join Date: Oct 2003
Location: Elkhart Texas
Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo
Posts: 6,411
Send a message via AIM to niterydr
Re: 1G Auto to Manual Swap

Quote:
Originally Posted by wohlfman
What can I use off of a 93 AWD laser 5 speed, to a 92 Eclipse GSX automatic.
I am putting a manual in the GSX.
You need:
*assuming both vehicles are completely stock.
-Transmission w/shifter brackets/etc.
-transfercase
-rear end assembly (atleast the diff, maybe a 4 bolt upgrade if the axles are different).
-slave cylinder
-line from slave cylinder assembly to clutch pedal
-clutch master cylinder assembly (firewall modifications required, as raptor mentioned)
-clutch/flywheel
-starter plate? (not sure on this one but I think they are different
-cams
-exhaust manifold
-turbo w/lines
-injectors
-fuel pump? (again, might be the same)
-ecu
obviously all the reverse wiring sensors/harness/clutch sensor, etc..like raptor mentioned
-shifter cables
-shifter base
-center console
-pedal assembly
Thats all the stuff that has to be 'swapped' or replace I can remember off the top of my head.

Its not an easy task, or a quick one. Good luck.
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
niterydr is offline   Reply With Quote