MitsuStyle - View Single Post

TalonFiero · 03-26-2005

Has anyone ever rebuilt a Mitsu turbo before? I took apart my td05h 20g today and found that the thrust bearing had a bit of wear and the turbine side oil seal is shot. The rest of the turbo seems to still be in decent shape (shaft looks good using a caliper, wheels don't show any damage, bearings look fine. I have looked at rebuild kits for $100 and thought I might give it a shot, seems simple enough as the damage doesn't appear to be to terrible.

Jim

03-26-2005	#1
TalonFiero moonshine power Looney Tunes Mahjong Champion! Mine Sweeper Champion! Join Date: Oct 2003 Location: Ethanol Plant Drives: 08 Saab 9-7x Aero Posts: 1,358	Rebuilding a Mitsu Turbo Has anyone ever rebuilt a Mitsu turbo before? I took apart my td05h 20g today and found that the thrust bearing had a bit of wear and the turbine side oil seal is shot. The rest of the turbo seems to still be in decent shape (shaft looks good using a caliper, wheels don't show any damage, bearings look fine. I have looked at rebuild kits for $100 and thought I might give it a shot, seems simple enough as the damage doesn't appear to be to terrible. Jim Last edited by TalonFiero; 03-26-2005 at 07:15 PM..