MitsuStyle - View Single Post

niterydr · 03-01-2005

Wow nothing like a moderator taking the post off topic.
I think the milder cam profile should fit the bill quiet nicely. I would check out some spool up testing (if any is available) and research how fast the lift comes on, and if degreeing the cams changes that point drasticly. From what I recall, the 264's were a bit short on the lift and duration, but offered a 'fatter' cam profile, similar to the factory 93 cams. I'll do some digging around and see what I can find.

03-01-2005	#8
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: CAMS!!! Best for 14B/E3 B16G? Wow nothing like a moderator taking the post off topic. I think the milder cam profile should fit the bill quiet nicely. I would check out some spool up testing (if any is available) and research how fast the lift comes on, and if degreeing the cams changes that point drasticly. From what I recall, the 264's were a bit short on the lift and duration, but offered a 'fatter' cam profile, similar to the factory 93 cams. I'll do some digging around and see what I can find. __________________ My street car runs low 11's and my race car's personal best is a mid 11....