MitsuStyle - View Single Post

Nash · 02-19-2005

You don't need a 90 CAS, the one from the 99 will work just fine. You will just need to get the intake cam taped so you can use the 99 CAS. The water line and thermostat housing needs to come from a 91-94. You do not need to use a 1G coil pack, a 2G one will work just fine, you will just have to figure out a way to mount it. You will also need to use 1G radiator house, I can't remember which one. You will need to cut the shifter counter weight off. I can't remember if there is anything else you need to do. If there is I will make sure to post it up.

02-19-2005	#12
Nash 5 Reel Slots Champion! Cat Baseball Champion! From Start To Finish Champion! Mah-Jong Connect Champion! Summer Games Champion! Join Date: Oct 2003 Location: Coon Rapids Drives: 600rr, IX SE Posts: 794	Re: 1g head on a 2g engine swap You don't need a 90 CAS, the one from the 99 will work just fine. You will just need to get the intake cam taped so you can use the 99 CAS. The water line and thermostat housing needs to come from a 91-94. You do not need to use a 1G coil pack, a 2G one will work just fine, you will just have to figure out a way to mount it. You will also need to use 1G radiator house, I can't remember which one. You will need to cut the shifter counter weight off. I can't remember if there is anything else you need to do. If there is I will make sure to post it up. __________________ The problem with doing nothing is not knowing when you're finished.