MitsuStyle - View Single Post

john · 01-23-2005

Bracing the turbo to the motor would limit vibration. All you would have to worry about is having a strong piece of steel. I am not sure how that turbo is setup, but on my 50 and 60 trims I would make a mount where it would bolt to the compressor or exhaust housing. Get longer bolts and have the brace as a "spacer." LMK if you do not understand. I am having trouble coming up with the correct words. I am talking about the roughly 8 bolts which hold the comp cover on.

01-23-2005	#5
john Business as usual Join Date: Oct 2003 Location: Isanti, MN Drives: Dodge Viper and Honda Insight Posts: 2,206	Re: Turbo Bracing Question: Bracing the turbo to the motor would limit vibration. All you would have to worry about is having a strong piece of steel. I am not sure how that turbo is setup, but on my 50 and 60 trims I would make a mount where it would bolt to the compressor or exhaust housing. Get longer bolts and have the brace as a "spacer." LMK if you do not understand. I am having trouble coming up with the correct words. I am talking about the roughly 8 bolts which hold the comp cover on. __________________ 97 Viper GTS 03 Mercedes CLK500 rollin on dubs...