MitsuStyle - View Single Post - Questing about crankwalk and my clutch system

Onefast99gsx · 01-16-2005

UPDATE: If got home and mounted the dial indicator on a magnetic surface. I put the needle on the outter most area of the replaceable section of the fidanza flywheel. I used a crow bar type tool and pryed between the back of the flywheel and the black. I would have been in a sense pulled the flywheel towards the passenger side of the car. I physically could not make the needle move any more than .002 to .004" at most. I think those readers derived from mostly flexing of the flywheel from pulling on it so hard with the crow bar. Now i did not try moving the crank towards the driver side of the car. Not sure how i could do that unless you pry between the block and the crankshaft pulley. If that's the case i'd need a 2nd person on hand to watch the needle while i pry on it.

You think things are looking good so far????

1Vicious- I hope i don't need that 7bolt block, but if i do, i will be calling upon you.

Thanks again.

01-16-2005	#10
Onefast99gsx Join Date: Sep 2004 Location: Wisconsin Posts: 1,411	Re: Questing about crankwalk and my clutch system UPDATE: If got home and mounted the dial indicator on a magnetic surface. I put the needle on the outter most area of the replaceable section of the fidanza flywheel. I used a crow bar type tool and pryed between the back of the flywheel and the black. I would have been in a sense pulled the flywheel towards the passenger side of the car. I physically could not make the needle move any more than .002 to .004" at most. I think those readers derived from mostly flexing of the flywheel from pulling on it so hard with the crow bar. Now i did not try moving the crank towards the driver side of the car. Not sure how i could do that unless you pry between the block and the crankshaft pulley. If that's the case i'd need a 2nd person on hand to watch the needle while i pry on it. You think things are looking good so far???? 1Vicious- I hope i don't need that 7bolt block, but if i do, i will be calling upon you. Thanks again.