MitsuStyle - View Single Post - Easiest way to get the springs/valves off head.

dumb_ricer · 01-10-2005

Yeah, what JET said is what I have seen done quite a few times.

You pretty much buy a deep socket (dont know what size) and get a C clamp large enough to go around the head so you can clamp it on the valve then cut a hole in the side of the socket so you can fit your fingers inside to pull out the retainers. Pretty simple really.

01-10-2005	#1
dumb_ricer Hates Everything Join Date: Dec 2003 Location: Las Vegas Drives: Neon Posts: 445	Re: Easiest way to get the springs/valves off head. Yeah, what JET said is what I have seen done quite a few times. You pretty much buy a deep socket (dont know what size) and get a C clamp large enough to go around the head so you can clamp it on the valve then cut a hole in the side of the socket so you can fit your fingers inside to pull out the retainers. Pretty simple really.