engine swap problems
ok im having problems remember where certain things go and the chiltons is not helping.
As far as my fuel rail goes there are two vaccum lines one that runs right off the fuel press. reg and one right before it. During the swap i yanked off all the emisions garbage but on thepressure reg. i left those two lines... where do they go? do I cap them off and if they ran to something else do i cap them off too?
Also there is a ground wire that is located on the firewall right next to the brake /clutch fluid resovoir (to the left) where on the motor do i need to place this I cant find anything in pictures or the manual for it.
thanks
|