MitsuStyle - View Single Post

Raptor · 10-21-2004

He PM'd me, the ones in the outer edge are probably stripped. For anyone else that has this problem, if I remember right, the inner bolts are 22MM long and the outer are 25MM. The holes are deeper than that and have enough thread to handle another 5MM in length. So 25-27 in the middle and 30MM on the outside will usually solve the issue. The torque spec is 3ft lbs. You can't squish a mosquito in this state with that little pressure. If you are using a cheater bar on your VC bolts, you should take yourself out of the game.

10-21-2004	#5
Raptor ConArtist Join Date: Oct 2003 Posts: 1,960	He PM'd me, the ones in the outer edge are probably stripped. For anyone else that has this problem, if I remember right, the inner bolts are 22MM long and the outer are 25MM. The holes are deeper than that and have enough thread to handle another 5MM in length. So 25-27 in the middle and 30MM on the outside will usually solve the issue. The torque spec is 3ft lbs. You can't squish a mosquito in this state with that little pressure. If you are using a cheater bar on your VC bolts, you should take yourself out of the game. __________________ Quick Precision Racing, Inc. "Always Raising the Bar!" 651-488-7774