[LightningGSX]

Its not very hard if you just want the CF look.But if you want a light, strong and good fitting part that won't delaminate then it gets pretty difficult.There are lots of things you have to account for, like resin shrinkage, kinds of resin(most won't cure in the presence of oxygen), weave direction, $$$, ambient temps,mechanical properties,etc.And if you do have problems it gets expensive with a quickness.If your making something and you have some questions give me a PM and I'll try to help.Or if others are interested in playing with CF, I can probably do a basic write up pr something too.