MitsuStyle - View Single Post

s1ngletracker · 04-21-2015

Yeah, after now having taken a stab at setting up venting through the balance shaft alignment hole, I do not recommend it. The hole is too small and the way I ended up getting a barb attached to that hole left only a very small passage - I used a re-threaded 10mm banjo bolt.

Oh well, I'll have a go and see what it does. I'm really just using it as a catch can drainback.

04-21-2015	#243
s1ngletracker Join Date: Oct 2005 Location: The land of the next-gen HMMWV Drives: A BMW Posts: 1,875	Re: 95 Talon TSi AWD Yeah, after now having taken a stab at setting up venting through the balance shaft alignment hole, I do not recommend it. The hole is too small and the way I ended up getting a barb attached to that hole left only a very small passage - I used a re-threaded 10mm banjo bolt. Oh well, I'll have a go and see what it does. I'm really just using it as a catch can drainback. __________________ Style's automotive engineer Sponsored by DB Performance (dbptuning.com) A dsm, a bimmer, a DORGE CUMMINZ, and a non running DSM race car... for now.