MitsuStyle - View Single Post

**JET** · 07-24-2004

Make sure the masonry bit is carbide tipped.

I think I found the bits at sears? They are 1/8" and feel like sand paper on the outside. Definately not like a porting bit. EZ-outs are a pain in the ass if you break them off, that is why I almost never use them. Over a 3/8" bolt you are ok because it is a big one, but under than and you can run into trouble.

07-24-2004	#8
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Make sure the masonry bit is carbide tipped. I think I found the bits at sears? They are 1/8" and feel like sand paper on the outside. Definately not like a porting bit. EZ-outs are a pain in the ass if you break them off, that is why I almost never use them. Over a 3/8" bolt you are ok because it is a big one, but under than and you can run into trouble. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!