MitsuStyle - View Single Post

**JET** · 09-26-2014

If it went 2 turns and stopped you are screwed. That bolt is going to bust off. Never had one that did that and ended up coming out ok. Doing the trick Hughes mentioned about moving it in and out with pb blaster between each time will get it out farther, but I had those bust off too basically every time. You are going to need an angle grinder with a cutoff wheel to cut them and don't aim the sparks at the radiator. I think it was Blizz that put a hole in his radiator doing that :P

09-26-2014	#16
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: Exhaust to turbo bolts stuck If it went 2 turns and stopped you are screwed. That bolt is going to bust off. Never had one that did that and ended up coming out ok. Doing the trick Hughes mentioned about moving it in and out with pb blaster between each time will get it out farther, but I had those bust off too basically every time. You are going to need an angle grinder with a cutoff wheel to cut them and don't aim the sparks at the radiator. I think it was Blizz that put a hole in his radiator doing that :P __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!