MitsuStyle - View Single Post

**asshanson** · 11-11-2013

Got my corner balance done, I was super lucky. I had only setup the ride height in my garage at each corner to what I wanted it to be, and at the shop with scales I ended up with 49.9/50.1% cross weight without making any adjustment. This is full weight, full tank, with me in the seat.
LF: 429 RF: 400
LR: 638 RR: 613

However, I just remembered that I'm running slightly taller than OEM diameter tires right now, and soon when I switch to the RA1 the only close size is slightly shorter than OEM, so my ride height is going to be a decent amount lower, and I may decide to raise it up a bit for fear of scraping, and have to corner weight again.

11-11-2013	#16
asshanson immune from paybans Join Date: Oct 2005 Location: West Des Moines Drives: poorly Posts: 4,358	Re: 2007 Lotus Exige S Got my corner balance done, I was super lucky. I had only setup the ride height in my garage at each corner to what I wanted it to be, and at the shop with scales I ended up with 49.9/50.1% cross weight without making any adjustment. This is full weight, full tank, with me in the seat. LF: 429 RF: 400 LR: 638 RR: 613 However, I just remembered that I'm running slightly taller than OEM diameter tires right now, and soon when I switch to the RA1 the only close size is slightly shorter than OEM, so my ride height is going to be a decent amount lower, and I may decide to raise it up a bit for fear of scraping, and have to corner weight again.