MitsuStyle - View Single Post - Knoxville's Heads 'n Cam Swap Build Thread

Knoxville · 08-19-2013

I think what you are seeing in piston 1 is some oil pooling at the bottom of the cylinder. After I cleaned the pistons with some carb cleaner, I put some oil around each cylinder wall while it sits for a bit for the heads arrive.

08-19-2013	#9
Knoxville Join Date: Oct 2010 Location: Champlin Drives: 09 G8 GT Posts: 153	Re: Knoxville's Heads 'n Cam Swap Build Thread I think what you are seeing in piston 1 is some oil pooling at the bottom of the cylinder. After I cleaned the pistons with some carb cleaner, I put some oil around each cylinder wall while it sits for a bit for the heads arrive. __________________ 2009 G8 GT Last edited by Knoxville; 08-20-2013 at 04:13 PM..