MitsuStyle - View Single Post

bramagedained · 06-17-2013

Valve at the end of the hose would be just about as simple. The valve I have is just 90 degree 1/4NPT to 1/4 compression hose. You could use the same valve, along with soemthing like a simple NPT-Compression fitting at the can and put the valve at the end.

It's really not much work at all, and would save you lots of time in the long run. And maybe $20 in parts.

06-17-2013	#14
bramagedained Join Date: May 2010 Location: KY/MN/Afghanistan Drives: EVO IX SSL Posts: 413	Re: Dave's Evo X Build/The Life of Dave blog Valve at the end of the hose would be just about as simple. The valve I have is just 90 degree 1/4NPT to 1/4 compression hose. You could use the same valve, along with soemthing like a simple NPT-Compression fitting at the can and put the valve at the end. It's really not much work at all, and would save you lots of time in the long run. And maybe $20 in parts.