MitsuStyle - View Single Post

punxnotdead185 · 06-07-2013

Alright I have a few things that need to go,

First off is a Holset big H1C, fresh rebuild so zero shaft play and spins perfect, will let go for $100 because I don't have a turbine housing for it, sold my BEP housing separate.

Next is a FMIC, 2.5" in and out, about 12" tall with a 18" wide 3" thick core, leaks a little not that bad, could be fixed pretty easy. Pipes are a little banged up also. $40 takes it.

Block sold

If interested PM me

06-07-2013	#1
punxnotdead185 Join Date: Jun 2010 Location: Oakdale, MN Drives: 95 AWD Mirage Coupe with AIDS Posts: 230	Holset, FMIC, 6 bolt block Alright I have a few things that need to go, First off is a Holset big H1C, fresh rebuild so zero shaft play and spins perfect, will let go for $100 because I don't have a turbine housing for it, sold my BEP housing separate. Next is a FMIC, 2.5" in and out, about 12" tall with a 18" wide 3" thick core, leaks a little not that bad, could be fixed pretty easy. Pipes are a little banged up also. $40 takes it. Block sold If interested PM me Last edited by punxnotdead185; 06-09-2013 at 10:43 AM..