Quote:
Originally Posted by Yiddie
With an upgraded intake and that turbo.. I don't see much lag there.
|
I know we live in a world today where on the internet, anything smaller than a 61mm is "small". Forget that bullshit, a 62mm is a fairly large turbo to 99% of us. That turbo is going to shift your power band quite a bit to the right. Add in a SMIM, not sure what you're reading but that will also likely move your power band even more right. Add in larger cams, more right. Add in some tubular manifold instead of the short runner cast one (that EVERYONE is telling you to keep but for some reason you have a hard-on for tubular), and that may move it a tad more right.
By the time you're all said n done, I would predict your setup to hit 30psi around 5k+ RPM. I say that because that's about where my similar setup on my Talon hit 30psi (built 2.0, T3 tubular mani, S362, JMF intake, 272 cams). It's a world of a difference from a 16g as far as lag goes. Which may very well have a negative affect on how "enjoyable" the car is to drive. And this is EXACTLY why all of us are saying to stick with the FP manifold, and go with as small of a turbo that reaches your power goals.
Kerry on here had an FP manifold, and a bolt on SCM61, he out-spooled me and kept up up-top.