MitsuStyle - View Single Post

dsmghost · 10-31-2012

My starter solenoid has been causing an intermittent no start, so I swapped it with a spare starter I had. Also, I've had to add coolant a time or two in the past few weeks, pressure test revealed a small leak on the heater hose, just had to tighten the clamp. Almost 3k miles since assembly, its been a great daily driver except the starter recently acting up.

Since I can get Blizzaks for 50% off store cost and I can mount and balance for free, I'm going to be getting a set soon and hoping for snow. Im going with the LM-60s they have a H speed rating. The WS70 is a T.

10-31-2012	#118
dsmghost Join Date: Nov 2011 Location: South Minneapolis Drives: 1gb Talon TSi AWD Posts: 525	Re: 1g 6 bolt 4g63 tsi build My starter solenoid has been causing an intermittent no start, so I swapped it with a spare starter I had. Also, I've had to add coolant a time or two in the past few weeks, pressure test revealed a small leak on the heater hose, just had to tighten the clamp. Almost 3k miles since assembly, its been a great daily driver except the starter recently acting up. Since I can get Blizzaks for 50% off store cost and I can mount and balance for free, I'm going to be getting a set soon and hoping for snow. Im going with the LM-60s they have a H speed rating. The WS70 is a T.