[tehehodi]

Guess who's on ceddy mods!

<-----This guy!

Install was flawless minus one hiccup. Again, this car has never failed me. I think it truly loves me.

Today, we started at 12ish and the first mod was Vals(burger joint on the cheap).
Then we installed an AEM uego. Next up was ecu, while jungy was under the dash working his soldering magic, I was up front and installed a grimspeed mbc and the 1g CAS.

Later on, jungy put the ecu in after pinning 79 for the reflash adapter.

Read the ecu using ECUFlash and after calling spaz to reconfirm things, got ceddymods flashed on the ecu(SD version with big maps). I'm still running on the MAF until my MAP sensor comes in and we are ready to go SD.

1st try, fuel pump wasn't turning on. We remembered that it's a N/T spyder ecu and it triggers the fuel relay differently. After a little research we tapped into a power wire off the ecu to trigger the pump, flawless.

2nd try, no spark. This is where we were stumped, tried researching and jungy came to the conclusion that he forgot to solder a wire, DOH!
Re soldered our harness and the car ran perfectly.

Set the base timing to 5* and we are ready to swap injectors and fuel! That won't happen til this weekend because we are so busy with school. Unfortunately, I have to work on my birthday from 3-11 so, I will not be going to the track. Always next time.

So until we have time again, I can't wait to mash on this damn peddle and jizzinmahpants! I <3 my DSM!

On that note, sorry for breaking the cruise rules but it'll be done with how installs have been going!